Sony KE-50XS910 Operating Instructions - Page 29
Cable Box Only, the TV's VHF/UHF jack.
View all Sony KE-50XS910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Setup Cable Box Only For best results, use this connection if: s Your cable company scrambles all channels, which requires you to use a cable box. s You do not have a VCR. (If you have a VCR, see pages 30 and 32.) With this connection you can: s Use the TV remote control to change channels coming through the cable box to the TV's VHF/UHF jack. (You must first program the remote control for your specific cable box.) About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, all channels come into the TV through your cable box and only one unscrambled signal is sent to the TV, so you cannot use the dual picture features. If some of your channels are scrambled, but others are not, consider using the "Cable Box and Cable Only" on page 25 instead. To connect the cable box 1 Connect the CATV cable to the cable box's input jack. 2 Use the supplied antenna cable to connect the cable box's output jack to the TV's VHF/UHF jack. 3 Run the Auto Setup program, as described in "Setting Up the Channel List" on page 48. CATV cable Antenna cable (supplied) Rear of TV VHF/UHF IN OUT Cable box 27