Sony KLV-32S550A Operating Instructions - Page 18
Sound menu, Reset, Band Equalizer, Balance, Intelligent Volume, Volume Offset, Surround, Dual Sound
UPC - 826422447458
View all Sony KLV-32S550A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Sound menu Sound Mode Reset 5 Band Equalizer Balance Intelligent Volume Volume Offset Surround Dual Sound "Dynamic": Enhances treble and bass. Recommended for home entertainment. "Standard": For standard sound. "Clear Voice": Makes voice sound clearer. Resets all the "Sound" settings except "Sound Mode" and "Dual Sound" to the factory settings. Adjusts sound frequency settings. 1 Make sure that "Adjust" is selected, then press . Selecting "Reset" will set your TV to the factory settings. 2 Press G/g to select the desired sound frequency, then press F/f to adjust the setting and press . The adjusted settings will be received when you select "Sound Mode" options. • Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency will affect lower pitched sound. Emphasises left or right speaker balance. Minimizes the difference in volume level between all programmes and adverts (e.g. adverts tend to be louder than programmes). Adjusts the volume level of the current input relative to other inputs. Choose either "On" (surround), "Simulated Stereo" (stereo-like monaural sound) or "Off". Selects the sound from the speaker for a stereo or bilingual broadcast. The selection varies, depending on the Broadcasting. Broadcasting NICAM stereo Selection Stereo (stereo sound)/Mono (regular sound) NICAM bilingual Main (main sound)/Sub (sub sound)/Mono (regular sound) NICAM monaural Main (main sound)/Mono (regular sound) A2 (German) stereo Stereo (stereo sound)/Mono (regular sound) A2 (German) bilingual Main (main sound)/Sub (sub sound) • If the signal is very weak, the sound becomes monaural automatically. • If the stereo sound is noisy when receiving a NICAM programme, select "Mono". The sound becomes monaural, but the noise is reduced. • The "Dual Sound" setting is memorised for each programme position. • You cannot receive a stereo broadcast signal when "Mono" is selected for the programme position. z • If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "Main" or "Sub". However, when the external equipment connected to the HDMI jack is selected, this is fixed to "Stereo". • If you access to FM Radio mode, set "Dual Sound" to "Stereo" or "Mono". 18 GB