Sony KV-40XBR800 Operating Instructions - Page 32
Watch the VCR
UPC - 027242604803
View all Sony KV-40XBR800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
SETUP Notes on Using This Connection To Do This ... Do This ... Watch the satellite receiver Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the illustration). The VCR must be turned on and set to the satellite receiver's line input. Watch the VCR Press TV/VIDEO repeatedly to select the input to which the VCR is connected (VIDEO 1 in the illustration). Set up the TV remote control to operate the satellite receiver or VCR If you have a non-Sony VCR or satellite receiver, you must program the remote control. See "Programming the Remote Control" on pages 43-44. Activate the TV remote For the satellite receiver, press SAT/CABLE FUNCTION. For the VCR, open the control to operate the satellite outside cover, as shown on page 42. Then set the A/V slide switch to the receiver or VCR position you programmed for the VCR. Control satellite receiver and See "Operating a Satellite Receiver" on page 60 and "Operating a VCR" on VCR functions with the TV page 60. remote control Label video inputs to easily See the instructions for setting up Video Labels on pages 74-75. identify equipment connected to the TV Setup SETUP SETUP SETUP SETUP 31