Sony LBT-D990 Operating Instructions - Page 39

Tape Deck, Tuner

Page 39 highlights

Play does not start from the first track. • The player is in Program or Shuffle Play mode. Press PLAY MODE repeatedly until "PROGRAM" or "SHUFFLE" disappear from the display. Tape Deck The tape does not record. • No tape is in the cassette holder. • The tab has been removed from the cassette (see page 37). • The tape has reeled to the end. The tape does not record nor play, or there is a decrease in sound level. • The heads are dirty. Clean them (see page 37). • The record/playback heads are magnetized. Demagnetize them (see page 37). The tape does not erase completely. • The record/playback heads are magnetized. Demagnetize them (see page 37). There is excessive wow or flutter, or the sound drops out. • The capstans or pinch rollers are dirty. Clean them (see page 37). Noise increases or the high frequencies are missing. • The record/playback heads are magnetized. Demagnetize them (see page 37). If other problems not described above occur, reset the system as follows: (LBT-D290/D590/G3300/XB3/XB3K/KB4/ XB4K/XB30 only) 1 Unplug the power cord. 2 Plug the power cord back in. 3 Press GROOVE, ENTER/NEXT, and DISC 1 at the same time. (LBT-D690/D990/XB600/XB6/XB6K only) 1 Unplug the power cord. 2 Plug the power cord back in. 3 Press SPECTRUM ANALYZER, ENTER, and DISC 1 at the same time. Tuner Severe hum or noise ("TUNED" or "STEREO" flashes in the display. • Adjust the antenna. • The signal strength is too weak. Connect an external antenna. A stereo FM program cannot be received in stereo. • Press STEREO/MONO so "STEREO" appears in the display. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

39
Play does not start from the first track.
• The player is in Program or Shuffle Play
mode. Press PLAY MODE repeatedly
until “PROGRAM” or “SHUFFLE”
disappear from the display.
Tape Deck
The tape does not record.
• No tape is in the cassette holder.
• The tab has been removed from the
cassette (see page 37).
• The tape has reeled to the end.
The tape does not record nor play, or there
is a decrease in sound level.
• The heads are dirty. Clean them (see page
37).
• The record/playback heads are
magnetized. Demagnetize them (see page
37).
The tape does not erase completely.
• The record/playback heads are
magnetized. Demagnetize them (see page
37).
There is excessive wow or flutter, or the
sound drops out.
• The capstans or pinch rollers are dirty.
Clean them (see page 37).
Noise increases or the high frequencies are
missing.
• The record/playback heads are
magnetized. Demagnetize them (see page
37).
Tuner
Severe hum or noise (“TUNED” or
“STEREO” flashes in the display.
• Adjust the antenna.
• The signal strength is too weak. Connect
an external antenna.
A stereo FM program cannot be received in
stereo.
• Press STEREO/MONO so “STEREO”
appears in the display.
If other problems not described
above occur, reset the system as
follows:
(LBT-D290/D590/G3300/XB3/XB3K/KB4/
XB4K/XB30 only)
1
Unplug the power cord.
2
Plug the power cord back in.
3
Press GROOVE, ENTER/NEXT, and DISC
1 at the same time.
(LBT-D690/D990/XB600/XB6/XB6K only)
1
Unplug the power cord.
2
Plug the power cord back in.
3
Press SPECTRUM ANALYZER, ENTER,
and DISC 1 at the same time.