Sony LBT-GPX55 Operating Instructions - Page 23
About the BLUETOOTH, indicator, Pairing this system with a, device
View all Sony LBT-GPX55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Bluetooth About the BLUETOOTH indicator The BLUETOOTH indicator lights up or flashes in blue to show the Bluetooth status. System status Indicator status Bluetooth standby Flashes slowly Bluetooth pairing Flashes quickly Bluetooth connecting Flashes Bluetooth connection Lights up is established Pairing this system with a Bluetooth device Pairing is an operation where Bluetooth devices register with each other beforehand. Once a pairing operation is performed, it does not need to be performed again. If your device is an NFC-compatible smartphone, the manual pairing procedure is not necessary. 1 Place the Bluetooth device within 1 meter (3 feet) from the system. 2 Press BLUETOOTH on the unit to select Bluetooth function. "BLUETOOTH" appears in the display panel. Note If the system is connected to a Bluetooth device, press BLUETOOTH to disconnect the Bluetooth device. 3 Hold down BLUETOOTH on the unit for 2 seconds or more. "PAIRING" flashes in the display panel. 4 Perform the pairing procedure on the Bluetooth device. For details, refer to the operating instructions of your Bluetooth device. 5 Select the model number of the unit on the display of the Bluetooth device. For example, select "SONY MHC-GPX88" (or LBT-GPX77/ GPX55/MHC-GPX77/GPX55/ GPX33). If passkey is required on the Bluetooth device, enter "0000". 6 Perform the Bluetooth connection on the Bluetooth device. When pairing is completed and the Bluetooth connection is established, Bluetooth device name appears in the display panel. Depending on the Bluetooth device, connection may start automatically after pairing is completed. You can check the Bluetooth device address by pressing DISPLAY repeatedly. Notes • You can pair up to 9 Bluetooth devices. If the 10th Bluetooth device is paired, the least recently connected device will be replaced by the new one. • "Passkey" may be called "Passcode", "PIN code", "PIN number" or "Password", etc., depending on the device. • The pairing standby status of the system is canceled after about 5 minutes. If pairing is not successful, repeat from step 1. • While connected to a Bluetooth device, this system cannot be detected and connection cannot be established from another Bluetooth device which is never paired before. • If you want to pair with another Bluetooth device, repeat steps 1 to 6. 23GB