Sony LBT-LCD77Di Operating Instructions - Page 115
Tuner, Optional components, To change the AM tuning interval, A stereo FM program cannot
UPC - 027242795051
View all Sony LBT-LCD77Di manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
The angles cannot be changed. Multi-angles are not recorded on the DVD VIDEO being played back. The DVD VIDEO prohibits changing the angles. Tuner The radio presetting is canceled. The power cord is disconnected or a power failure occurred for longer than a day. Redo "Presetting a radio station" (page 65). There is severe hum or noise. ("TUNED" or "STEREO" flashes in the display.) Set the proper band and frequency (page 64). Connect the antenna properly (page 23). Find a place and an orientation that provide good reception, then set up the antenna again. If you cannot obtain good reception, we recommend that you connect a commercially available external antenna. The supplied FM lead antenna receives signals along its entire length, so make sure you extend it fully. Locate the antennas as far away from the speaker cords and the power cord as possible, to avoid picking up noise. Try turning off the surrounding electrical equipment. A stereo FM program cannot be received in stereo. Press REPEAT/FM MODE repeatedly until "MONO" disappears from the display. Optional components There is no sound. Refer to General item "There is no sound." (page 103) and check the condition of the system. Connect the component properly (page 100) while checking: if the cords are connected properly. if the cord plugs are firmly inserted all the way. Turn on the connected component. Refer to the operating instructions supplied with the connected component and start playback. To change the AM tuning interval The AM tuning interval is factory-preset to 9 kHz (or 10 kHz for some areas). Use buttons on the unit for the operation. 1 Press TUNER/BAND repeatedly to select "AM." 2 Press / to turn off the system. Additional Information Continued 115GB