Sony LBT-SH2000 Operating Instructions - Page 15
Receiving RDS broadcasts, Presetting radio stations
View all Sony LBT-SH2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Tuner 1 Press TUNER/BAND repeatedly to select AM band. 2 Press "/1 to turn off the system. 3 While holding down ENTER, press "/1. "AM 9K STEP" or "AM 10K STEP" appears in the display panel. When you change the interval, all the AM preset stations are erased. Presetting radio stations You can store up to 20 FM and 10 AM stations as your favorite stations. Use the buttons on the remote control to perform this operation. 1 Tune to the station you want. 2 Press TUNER MEMORY. Preset number 3 Press +/- repeatedly to select the preset number you want, then press ENTER. "COMPLETE" appears in the display panel. The station is stored. To tune to a preset station Press TUNING MODE repeatedly until "PRESET" lights up in the display panel. Then, press +/- repeatedly to select the preset number you want. Receiving RDS broadcasts This system allows you to use Radio Data System (RDS), which enables radio stations to send additional information along with the regular programming signal. This system offers convenient RDS features, such as Program Service name display. RDS is available only for FM stations.* * Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS services in your area, check with your local radio stations for details. Simply select a station on the FM band. When you tune to a station that provides RDS services, the Program Service name appears in the display panel. You can check the RDS information by pressing DISPLAY on the remote control repeatedly. Note RDS may not work properly if the station you tuned to is not transmitting the RDS signal or if the signal strength is weak. 15US