Sony MEX-N4000BT Operating Instructions - Page 11
Playing a BLUETOOTH Device, Searching and Playing Tracks, Searching by skipping items
View all Sony MEX-N4000BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
To remove the device Stop playback, then remove the device. Caution for iPhone When you connect an iPhone via USB, phone call volume is controlled by the iPhone, not the unit. Do not inadvertently increase the volume on the unit during a call, as sudden loud sound may result when the call ends. Operating an iPod directly (Passenger control) Press and hold MODE during playback until [MODE IPOD] appears to enable operation by the iPod directly. Note that the volume can be adjusted only by the unit. To exit passenger control Press and hold MODE until [MODE AUDIO] appears. Playing a BLUETOOTH Device You can play contents on a connected device that supports BLUETOOTH A2DP (Advanced Audio Distribution Profile). 1 Make BLUETOOTH connection with the audio device (page 7). 2 Press SRC to select [BT AUDIO]. 3 Operate the audio device to start playback. 4 Adjust the volume on this unit. Notes Depending on the audio device, information such as title, track number/time and playback status may not be displayed on this unit. Even if the source is changed on this unit, playback of the audio device does not stop. [BT AUDIO] does not appear in the display while running the "App Remote" application via the BLUETOOTH function. To match the volume level of the BLUETOOTH device to other sources Start playback of the BLUETOOTH audio device at a moderate volume, and set your usual listening volume on the unit. Press MENU and rotate the control dial. Select [SOUND] [BTA VOL] (page 18). Searching and Playing Tracks Repeat play and shuffle play 1 During playback, press (repeat) for Repeat play, or (shuffle) for Shuffle play. 2 Press (repeat) or (shuffle) repeatedly to select the desired play mode. Playback in selected play mode may take time to start. Available play modes differ depending on the selected sound source. Searching a track by name (QuickBrowZer™) 1 During CD, USB or BT audio device*1 playback, press (browse)*2 to display the list of search categories. When the track list appears, press (back) repeatedly to display the desired search category. *1 Available only for audio devices supporting AVRCP (Audio Video Remote Control Profile) 1.4 or above. *2 During USB playback, press (browse) for more than 2 seconds to directly return to the beginning of the category list. 2 Rotate the control dial to select the desired search category, then press it to confirm. 3 Repeat step 2 to search the desired track. Playback starts. To exit the Quick-BrowZer mode Press (browse). Searching by skipping items (Jump mode) 1 Press (browse). 2 Press SEEK +. 3 Rotate the control dial to select the item. The list is jumped in steps of 10% of the total number of items. 4 Press ENTER to return to the Quick- BrowZer mode. The selected item appears. 11GB