Sony MHC-LX10000 Operating Instructions (MHC-LX10000) - Page 22

Waking up to music, - Play Timer - how do i set the clock on my without the remote

Page 22 highlights

Waking up to music - Play Timer You can wake up to music at a preset time. Make sure you have set the clock (see "Setting the clock" on page 8). Use buttons on the remote for the operation. 1 Prepare the music source you want to play back. • Disc: Load a disc. To start from a specific track, make a program (see "Creating your own program" on page 11). • Tape: Load a tape with the side you want to play back facing forward. • Radio: Tune in the preset station you want (see "Listening to the radio" on page 15). 2 Press VOLUME +/- to adjust the volume. 3 Press CLOCK/TIMER SET. "SET" appears in the display, then "PLAY SET?" flashes in the display. 4 Press ENTER. "ON" appears and the hour indication flashes in the display. 5 Set the time to start playback. Press -. or >+ repeatedly (or turn .> on the unit clockwise or counterclockwise) to set the hour, then press ENTER. The minute indication flashes in the display. Press -. or >+ repeatedly (or turn .> on the unit clockwise or counterclockwise) to set the minute, then press ENTER. 6 Set the time to stop playback following the same procedure as step 5. 7 Press -. or >+ repeatedly (or turn .> on the unit clockwise or counterclockwise) until the music source you want appears in the display. Each time you press the button, the display changes as follows: t TUNER y CD PLAY T t TAPE PLAY T 8 Press ENTER. The type of timer ("PLAY TIMER"), followed by the start time, the stop time and the music source appears in the display. 9 Press ?/1 to turn off the system. Other operations To Check the setting Change the setting Cancel the timer Do this 1 Press CLOCK/TIMER SELECT. "SELECT" appears in the display. 2 Press -. or >+ repeatedly (or turn . > on the unit clockwise or counterclockwise) to select "PLAY SELECT?", then press ENTER. Start from step 1. 1 Press CLOCK/TIMER SELECT. "SELECT" appears in the display. 2 Press -. or >+ repeatedly (or turn . > on the unit clockwise or counterclockwise) to select "TIMER OFF?", then press ENTER. Notes • You cannot select the Play Timer and Timer Recording at the same time. • If you use the Play Timer and the Sleep Timer at the same time, the Sleep Timer has priority. • The Play Timer will not be activated if the system is turned on. Tips • The system turns on 15 seconds before the preset time. • When the Play Timer is selected, "PLAY" lights up in the display. 22US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

22
US
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
clock” on page 8).
Use buttons on the remote for the operation.
1
Prepare the music source you want to
play back.
Disc: Load a disc. To start from a specific
track, make a program (see “Creating
your own program” on page 11).
Tape: Load a tape with the side you want
to play back facing forward.
Radio: Tune in the preset station you
want (see “Listening to the radio” on
page 15).
2
Press VOLUME +/– to adjust the
volume.
3
Press CLOCK/TIMER SET.
“SET” appears in the display, then “PLAY
SET?” flashes in the display.
4
Press ENTER.
“ON” appears and the hour indication
flashes in the display.
5
Set the time to start playback.
Press –
.
or
>
+ repeatedly (or turn
.>
on the unit clockwise or
counterclockwise) to set the hour, then
press ENTER.
The minute indication flashes in the
display.
Press –
.
or
>
+ repeatedly (or turn
.>
on the unit clockwise or
counterclockwise) to set the minute, then
press ENTER.
6
Set the time to stop playback following
the same procedure as step 5.
7
Press –
.
or
>
+
repeatedly (or
turn
.>
on the unit clockwise or
counterclockwise) until the music
source you want appears in the
display.
Each time you press the button, the display
changes as follows:
8
Press ENTER.
The type of timer (“PLAY TIMER”),
followed by the start time, the stop time and
the music source appears in the display.
9
Press
?/1
to turn off the system.
Other operations
Notes
You cannot select the Play Timer and Timer
Recording at the same time.
If you use the Play Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
The Play Timer will not be activated if the system is
turned on.
Tips
The system turns on 15 seconds before the preset
time.
When the Play Timer is selected, “PLAY” lights up
in the display.
Waking up to music
— Play Timer
To
Do this
Check
the setting
1
Press CLOCK/TIMER SELECT.
“SELECT” appears in the display.
2
Press –
.
or
>
+ repeatedly
(or turn
.
>
on the unit
clockwise or counterclockwise) to
select “PLAY SELECT?”, then
press ENTER.
Change
the setting
Start from step 1.
Cancel
the timer
1
Press CLOCK/TIMER SELECT.
“SELECT” appears in the display.
2
Press –
.
or
>
+ repeatedly
(or turn
.
>
on the unit
clockwise or counterclockwise) to
select “TIMER OFF?”, then press
ENTER.
t
TUNER
y
CD PLAY
T
t
TAPE PLAY
T