Sony MHC-RG70AV Operating Instructions - Page 16

Tape Loading a tape 1 Press TAPE A/B repeatedly to select deck A or B. 2 Press Z. 3 Insert a tape in deck A or B with the side you want to play/record facing forward. With the side you want to play/record facing forward. Playing a tape You can use TYPE I (normal) tape. 1 Load a tape. 2 Press DIRECTION repeatedly to select g to play one side. Select j* to play both sides. To play both decks in succession, select "RELAY" (Relay Play)**. 3 Press hH (or nN on the remote). Press hH (or nN on the remote) again to play the reverse side. The tape starts playing. Tape presence indicator To Stop play Pause Fast-forward or rewind Remove the cassette Do this Press x. Press X. Press again to resume play. Press m or M. Press Z. Searching for the beginning of the current or the next track (AMS)* To go forward Press > during playback when N lights in the display. "TAPE A (or TAPE B) >>> +1" appears. Press . during playback when n lights in the display. "TAPE A (or TAPE B) -1" appears. * AMS (Automatic Music Sensor) Tip When a tape is inserted, corresponding forward/ reverse indicators light. Note The AMS function may not operate correctly under the following circumstances: - When the unrecorded space between songs is less than 4 seconds long. - When the system is placed near a television. Reverse Forward indicator indicator * The deck stops automatically after repeating the sequence five times. ** Relay Play always follows this cyclic sequence up to five times, then stops: Deck A (front side) t Deck A (reverse side) t Deck B (front side) t Deck B (reverse side) 16