Sony MZ-N505 Operating Instructions - Page 56
The component does not support LP2 stereo or LP4 stereo.
View all Sony MZ-N505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Symptom Cause/Solution An MD is not played from the first track. • Disc playing stopped before it came to the last track. , Press N for 2 seconds or more to start playing. • Group mode is turned on. , Turn group mode off and play from the first track (press N for 2 seconds or more to start playing). Playback sound skips. • The recorder is placed where it receives continuous vibration. , Put the recorder on a stable place. • A very short track may cause sound to skip. , Try not to create a track under one second long. Sound has a lot of static. • Strong magnetism from a television or such device is interfering with operation. , Move the recorder away from the source of strong magnetism. Cannot find the track • You pressed X after pressing . or >. marks. , Press X before pressing . or >. The disc cannot edit • The component does not support LP2 stereo or LP4 stereo. on other component. , Edit on other component that support LP2 stereo or LP4 stereo. Momentary noise is heard. • Due to the special digital audio compression technology used in LP4 stereo mode, momentary noise may occur on very rare occasions with certain sound sources. , Record in normal stereo or LP2 stereo mode. The display window is not normal. • The recorder was disconnected from the power source. , Let the recorder sit for a while, or disconnect the power source, reconnect it, and then press any of the operation buttons. 56-GB