Sony MZ-NF810 Operating Instructions - Page 85

Release, Move, or Erase while

Page 85 highlights

Error message MENU NAME FULL NO BATT NO COPY NO DISC NO EDIT No MARK NO SET NoOPERATE NO SIGNAL P/B ONLY Meaning/Remedy • You pressed a key on the remote control while selecting a menu on the recorder. You pressed a key on the recorder while selecting a menu on the remote control. • You tried to enter more than 200 letters to label a single track, group, or disc. • You tried to enter a total of more than approximately 1,700 letters for track or disc names. • The rechargeable battery is not inserted. , Insert a rechargeable battery. • You tried to make a copy from a disc that is protected by the Serial Copy Management System. You cannot make copies from a digitally connected source which was itself recorded using digital connection. , Use analog connection instead (page 31). • You tried to play or record with no disc in the recorder. , Insert an MD. • You selected " : Erase" with a disc without group setting. , You cannot erase groups with a disc with no groups. • You selected, " : Set", " : Release", "Move", or "Erase" while recording. • You tried to erase the track mark at the beginning of the first track or group. • You tried to erase a track mark to combine tracks the recorder cannot combine (a track recorded in stereo and in mono, for example). • You tried to overwrite a track marks. • You selected bookmark play without setting bookmarks. , Set bookmarks (page 36). • You tried to make the following settings while recording. - Recording mode - Recording level - Selection of " : REC" in menu - Selection of "REC-Posi" during recording to a group. • You pressed +, - while setting a program on the remote control. • You tried to set Auto Time Mark while recording through digital connection. • You tried to press X or T MARK during synchro-recording. • The recorder could not detect digital input signals. , Make sure that the source is connected firmly (page 22). • You tried to record or edit on a pre mastered MD (P/B stands for "playback"). , Insert a recordable MD. 85

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128

85
MENU
You pressed a key on the remote control while selecting a menu on
the recorder. You pressed a key on the recorder while selecting a
menu on the remote control.
NAME FULL
• You tried to enter more than 200 letters to label a single track,
group, or disc.
• You tried to enter a total of more than approximately 1,700 letters
for track or disc names.
NO BATT
• The rechargeable battery is not inserted.
,
Insert a rechargeable battery.
NO COPY
• You tried to make a copy from a disc that is protected by the Serial
Copy Management System. You cannot make copies from a
digitally connected source which was itself recorded using digital
connection.
,
Use analog connection instead (page 31).
NO DISC
• You tried to play or record with no disc in the recorder.
,
Insert an MD.
NO EDIT
• You selected “
: Erase” with a disc without group setting.
,
You cannot erase groups with a disc with no groups.
You selected, “
: Set”, “
: Release”, “Move”, or “Erase” while
recording.
• You tried to erase the track mark at the beginning of the first track
or group.
• You tried to erase a track mark to combine tracks the recorder
cannot combine (a track recorded in stereo and in mono, for
example).
• You tried to overwrite a track marks.
No MARK
• You selected bookmark play without setting bookmarks.
,
Set bookmarks (page 36).
NO SET
• You tried to make the following settings while recording.
— Recording mode
— Recording level
— Selection of “
: REC” in menu
— Selection of “REC-Posi” during recording to a group.
NoOPERATE
• You pressed
+, – while setting a program on the remote
control.
• You tried to set Auto Time Mark while recording through digital
connection.
• You tried to press
X
or T MARK during synchro-recording.
NO SIGNAL
• The recorder could not detect digital input signals.
,
Make sure that the source is connected firmly (page 22).
P/B ONLY
• You tried to record or edit on a pre mastered MD (P/B stands for
“playback”).
,
Insert a recordable MD.
Error message
Meaning/Remedy