Sony MZ-NH1 Operating Instructions - Page 85
While using group function, While the recorder is connected to the computer
View all Sony MZ-NH1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
While using group function Symptom Cause/Remedy The group function does • While using a disc without group setting, an attempt was made to not operate. select some group-related menu. , Use a disc with group setting. A track cannot be recorded to a new group. A new group cannot be created. • This is due to the MiniDisc system limitations (in MD mode only). Group information has been written to the area where the disc name is stored. The disc name and track names are recorded in the same area, which can store a maximum of approximately 1,700 characters. If the total number exceeds this amount, a new group cannot be created even though group mode is on. It is also impossible to make group settings at this time. While the recorder is connected to the computer Symptom Cause/Remedy The recorder is not recognized by the computer. • The dedicated USB cable is not firmly connected. , Connect the dedicated USB cable firmly to the recorder and the computer. • A USB hub is used. , Connect the dedicated USB cable directly to the USB port of the computer. • Network communication has failed. , Disconnect the dedicated USB cable, wait at least 2 seconds, and then reconnect it. If the recorder is still not recognized, disconnect the dedicated USB cable, restart the computer, and then connect the dedicated USB cable again. Even though the recorder is recognized by the computer, it does not operate normally. • A USB hub is used. , Connect the dedicated USB cable directly to the USB port of the computer. • You are using the recorder at a place with vibration. , Use the recorder at a place with no vibration. The recorder cannot be used as a storage device. • The SonicStage or MD Simple Burner software is active. , Close the SonicStage or MD Simple Burner software. • A standard disc is inserted. , Insert a disc used in Hi-MD mode. Only discs used in Hi-MD mode can be used as a storage media. The playing time of a transferred track is different from the time that appears on your computer monitor. This is due to a calculation discrepancy between the recorder and the computer. 85