Sony NAS-CZ1 M-Crew Operating Instructions - Page 31

Problem Cause/countermeasure The system stereo component does not respond. t Check that the connections have been made properly (page 7). t Disconnect the connecting cables and then reconnect them. t Try disconnecting the USB cable from the PC connecting adaptor and from the computer, and then connecting it again. The displayed name of the MD or t Click the Reload button (pages 11 and 15 in CD does not match the disc's the on-line manual). contents. t Restart M-crew. Should the problem persist, the data in the Disc Library may be corrupted. Enter the names again. The system sounds (warning t The system sounds have been specified not to alarm/mail arrival notice) are not sound during M-crew startup, or the setting heard. may have changed to OFF when M-crew was abnormally ended. To restore the sounds, restart M-crew and then quit the program normally. Or double-click the backup file (reg0.reg to reg3.reg) in the M-crew folder and follow the instructions to set up the program again. Specifications of CAV-MN10 Description Adaptor for connecting external devices to a PC Sampling frequency 44.1 kHz USB terminal Series B, bus power mode (conforms to USB Version 1.1) * Connect this terminal directly to the PC with the supplied USB cable. DIGITAL OUT Square optical connector jack with optical emission wavelength of 660 nm ANALOG OUT Stereo mini jack with an output level of 0.63 Vrms and a load impedance of 10 kΩ or more Maximum external dimensions 96 × 26 × 106 mm (W × H × D); (not including projecting parts) Weight Approx. 140 g 31GB