Sony NW-E505 Operating Instructions - Page 51
Other Information, To delete abnormal data from the built-in flash memory, If CANNOT PLAY, EXPIRED - no data error
View all Sony NW-E505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Other Information Message MG ERROR NO DATA PRESET FULL USB Connect Meaning An unauthorized distribution file is detected for copyright protection. There are no audio files in the built-in flash memory. 30 broadcast stations are already preset. Your Network Walkman is connected to a computer. Icon animates from left to right: Accesses to the built-in flash memory is in progress. Remedy Transfer the normal audio file back to the computer and then format your Network Walkman. For details, refer to "To delete abnormal data from the built-in flash memory" on page 51. If there are no audio files in the built-in flash memory, use the SonicStage software to transfer audio files. You can preset up to 30 broadcast stations. If you want to preset more stations, delete unnecessary stations first (page 43), then preset the stations you want. This is not a malfunction. You can operate your Network Walkman using the SonicStage, but you cannot operate the controls on your Network Walkman. Your Network Walkman is accessing to the built-in flash memory. Wait until the access completes. This message is displayed when transferring data to the built-in flash memory or formatting the Network Walkman. To delete abnormal data from the built-in flash memory If "CANNOT PLAY", "EXPIRED", "FILE ERROR", or "MG ERROR" is displayed, there is a problem with all or part of the data stored in the built-in flash memory. Please follow the procedures below to erase data you cannot play. 1 Connect your Network Walkman to the computer, and start the SonicStage software. 2 If you have already specified the data with problems, erase the data from the Portable Player window of the SonicStage software. 3 If the problem persists, transfer all data without problems back to the computer using the SonicStage software while your Network Walkman is connected to the computer. 4 Disconnect your Network Walkman from the computer and then format the built-in flash memory using the Format menu (page 37). 51