Sony PEG-SJ22 Read This First Operating Instructions - Page 42
Step 3: Setting the user name
View all Sony PEG-SJ22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Note Make sure that you directly connect the USB cable to the USB port of your computer. The HotSync® operation may not be performed normally if you connect it to your computer via a USB hub. Step 3: Setting the user name 1 Connect your CLIÉ handheld to your computer. 2 Rotate the Jog Dial™ navigator to select [HotSync] icon on the Application Launcher screen and press the Jog Dial™ navigator. The HotSync screen is displayed. Tip You can also tap [HotSync] icon to display the HotSync screen. 3 Tap the icon. The HotSync® operation starts and the installation for the necessary software starts automatically. 4 When the New User dialog box is displayed on your computer screen, enter your user name. Enter a user name that you prefer. Note When you have already used another CLIÉ handheld Every CLIÉ handheld should have a unique name. To prevent loss of user's records, never try to synchronize more than one CLIÉ handheld to the same user name. Tip When you transfer data between CLIÉ handhelds Refer to "Transferring data with another Sony CLIÉ™ handheld" in "Handbook." 5 Click OK on your computer screen. A beep sounds and the HotSync® operation starts. Your user name selected in step 4 is registered for your CLIÉ handheld. When the HotSync® process is complete, the message showing the HotSync® operation completion is displayed on your CLIÉ handheld. 42