Sony PVM-2950Q Operating Instructions / Mode d’emploi / Manual de ins - Page 7

Power sources 13 DEGAUSS button Press to demagnetize the screen. Wait for 10 minutes or more before activating this feature again. The same interval is needed after turning on the monitor. n CH +/- buttons (Cannot use these buttons with the monitor.) n VOL +/- buttons Press to obtain the desired volume. DI APERTURE +/- buttons Press the + button for more sharpness or the - button for less sharpness. (This adjustment has no effect on the pictures of RGB signals.) L] PHASE +/- buttons Press the + button to make the skin tones greenish or the - button to make them purplish. (NTSC signal only) CHROMA +/- buttons Press the + button to increase the color intensity and the - button to decrease it. (This adjustment has no effect on the pictures of RGB signals.) Connect the AC power cord (supplied) to the AC IN socket and to a wall outlet. • c!ct ilkoiel O 0 00 00 O 0000 to AC IN to a wall outlet To connect an AC power cord securely with an AC plug holder 1 Plug the power cord into the AC IN socket. Then, attach the AC plug holder (supplied) to the AC power cord. AC IN socket AC plug holder eizo cr (to ce4,30_ AC power plug 2 Slide the AC plug holder over the cord until it connects to the attached holder. To remove the AC power cord Squeeze the left and right sides and pull out the AC plugholder. 7