Sony RDP-XA700iPN AirPlay via Wi-Fi Network Setup - Page 4
Push-Button
View all Sony RDP-XA700iPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
WPS Setup device: compatible Wireless LAN router/access point Method: WPS Push-Button Configuration Method Before Starting 1 Place this unit close to the wireless LAN router/access point. 2 Turn this unit on. Starting Network Settings 1 Press and hold the WPS button on this unit until the beep sound is output from this unit. Rear of this unit The LINK indicator (page 5) starts to flash green. 3 Wait for about 70 seconds until the LINK indicator turns off. Notes While it is connected to a Wi-Fi Network, do not turn this unit off. The LINK indicator may not turn off after the first setting. In this case, skip the next step when the LINK indicator does not flash green. 2 Press and hold the WPS button on the router/access point within 90 seconds after step1. * The position and shape of the WPS button differ depending on the model of the router/access point. Tip For details on the WPS button, refer to the operating instructions of the router/access point. 3 Check the status of the LINK indicator (page 5). When the LINK indicator lights up green, the connection is established. GB