Sony RDP-XA900iPN AirPlay via Wi-Fi Network Setup - Page 6

 Setup device: iPhone / iPod touch/ iPad Method: D-Sappli setup Before Starting 1 Check that the iPhone/iPod touch/iPad you are using as the "AirPlay" device is connecting to the Wi-Fi Network. Starting Network Settings 1 Tap the D-Sappli icon to access it while keeping your iPhone/iPod touch/iPad on this unit. 2 Write down the Security Key (WEP or WPA key) of your wireless LAN router/ access point. For details, refer to the operating instructions of the router/access point. 3 Press to open the Docking Tray, and connect your iPhone/iPod touch/iPad to the connector. 2 Perform the network settings, following the on-screen instructions. 4 Turn this unit on (page 4). The LINK indicator (page 7) starts to flash green. 5 Wait for about 70 seconds until the LINK indicator turns off.  Tip If the message to download D-Sappli appears, follow the on-screen instructions and download it.  Notes  While it is connected to a Wi-Fi Network, do not turn this unit off, press the Home button, or disconnect your iPhone/iPod touch/iPad.  When a problem occurs during Wi-Fi settings, disconnect your iPhone/iPod touch/iPad and connect it again. GB 3 When the message [Connection complete.] appears, tap [OK] to finish the network settings. 4 Check the status of the LINK indicator (page 7). When the LINK indicator lights up green, the connection is established.