Sony RM-LJ304 Operating Instructions - Page 22
Additional Information, Troubleshooting
View all Sony RM-LJ304 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Additional Information 22 Troubleshooting If you experience any of the following difficulties while using the remote, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. The remote does not function. , Point the remote at the remote sensor on the receiver. , Remove any obstacles in the path between the remote and the receiver. , Replace all the batteries in the remote with new ones, if they are weak. / If the receiver's COMMAND MODE and the remote's COMMAND MODE do not match, transmission is not possible between the remote and the receiver. , Make sure you select the correct function on the remote. , When you operate a programmed non-Sony component, the remote may not function properly depending on the model and the make of the component. The component names appearing in the function list do not correspond to the jacks on the receiver./The sound field list does not appear. , The remote has not been initialized. Turn on the receiver, point the remote at the receiver, and press the SOUND FIELD, FUNCTION, or SUB button on the remote (see page 3). The SOUND FIELD button does not work. , If the receiver has the 5.1CH (/DVD) INPUT jacks, the SOUND FIELD button becomes inoperable whenever you select the component connected to these jacks. E appears in the display window of the remote. , The batteries are running out. Replace all the batteries with new ones. The function names that appear in the display windows of the receiver and the remote are different. , Select the correct function using the remote. When the CD player, tape deck, or MD deck is connected to the receiver via CONTROL A1/A1 jacks, Auto Function does not work properly. , Reprogram the remote (see page 16). "5.1CH" cannot be selected from the function list even though the receiver has 5.1CH (/DVD) INPUT jacks. , A communication error has occurred. Point the remote towards the receiver and select "5.1CH" from the function list again.