Sony STR-DA3300ES Operating Instructions (Large File - 19.55 MB) - Page 61

Enjoying Surround Sound Notes • This function does not work in the following cases. - The multi-channel input is selected. - Input signals of which the sampling frequency is more than 48 kHz are being received. - The multi-channel Linear PCM signals are received via an HDMI IN jack. • If you set up the sound field during DTS 96/24 signal reception, the signal will be played back only at 48 kHz. • Neural-THX is activated as a PCM signal of which the sampling frequency is less than 48kHz, a 2 channel analog signal or Linear PCM signals. The Neural-THX processing will be turned off automatically when another type of signal is input. The beginning of the sound may be dropped out when the SURROUND processing is turned on/off. Tips • We usually recommend "A.F.D. Auto", however sometimes it may be better to use SB Decoding to match the input stream to the mode you prefer. • You can identify the encoding format of DVD software, etc., by looking at the logo on the package. • Dolby Pro Logic IIx decoding is effective, when a multi-channel signal is input. At this time, the setup of "SB Decoding" and "SB Dec Mode" in the Surround settings menu becomes invalid. When you select decoding modes other than Dolby Pro Logic IIx, multi-channel sound (being encoded) is output. If you connect a sub woofer This receiver will generate a low frequency signal for output to the sub woofer when there is no L.F.E. signal, which is a low-pass sound effect output from a sub woofer to a 2 channel signal. However, the low frequency signal is not generated for "Neo:6 Cinema" or "Neo:6 Music" when all speakers are set to "LARGE." In order to take full advantage of the Dolby Digital bass redirection circuitry, we recommend setting the sub woofer's cut off frequency as high as possible. 61GB