Sony STR-DE475 Service Manual - Page 1

Sony STR-DE475 - Fm Stereo/fm-am Receiver Manual

Page 1 highlights

SERVICE MANUAL Ver 1.0 2001. 02 STR-DE475 US Model Canadian Model AEP Model UK Model Australian Model Chinese Model E Model Manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" the double-D symbol ; "AC-3" and "Pro Logic" are trademarks of Dolby Laboratories Licensing Corporation. SPECIFICATIONS AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 8 ohm loads, both channels driven, from 40 20,000 Hz; rated 80 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output (USA model only). Amplifier section POWER OUTPUT US, Canadian : Rated Power Output at Stereo mode (8 ohms 40 Hz - 20 kHz, THD 0.09%) 80 W + 80 W US, Canadian, AEP, UK : Reference Power Output (8 ohms 1 kHz, THD 0.7%) Front1): 80 W/ch Center1): 80 W Surround1): 80 W/ch EXCEPT : Rated Power Output at Stereo mode (8 ohms 1kHz, THD 0.7%) 80 W + 80 W 2) EXCEPT : Reference Power Output2) (8 ohms 1 kHz, THD 10%) Front1): 90 W/ch Center1): 90 W Surround1): 90 W/ch 1) Depending on the sound field settings and the sources, there may be no sound output. 2) Measured under the following conditions: Area code Power requirement E, Australian 240 V AC, 50 Hz Chinese 230 V AC, 50 Hz Taiwan 110 V AC, 50 Hz Frequency response MULTI CH IN, CD, MD/TAPE, DVD/LD, TV/SAT, VIDEO: 20 Hz - 20 kHz 0/- 0.5 dB (sound field, and tone bypassed) Inputs (Analog) MULTI CH IN, CD, MD/TAPE, DVD/LD, TV/SAT, VIDEO: Sensitivity: 250 mV Impedance: 50 kilohms S/N3): 85 dB (A, 250 mV4)) 3) INPUT SHORT 4) Weighted network, input level Inputs (Digital) DVD/LD (coaxial): Sensitivity: - Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) TV/SAT (Optical): Sensitivity: - Outputs Impedance: - S/N: 100 dB (A, 20 kHz LPF) MD/TAPE (OUT): VIDEO (AUDIO OUT): Voltages: 250 mV, Impedance: 10 kilohms SUB WOOFER: Voltage: 2 V Impedance : 1 kilohms PHONES: Accepts low- and high-impedance headphones Intermediate frequency 10.7 MHz Sensitivity Mono: 18.3 dBf, 2.2 µV/75 ohms Stereo: 38.3 dBf, 22.5 µV/75 ohms Usable sensitivity 11.2 dBf, 1 µV/75 ohms S/N Mono: 76 dB Stereo: 70 dB Harmonic distortion at 1 kHz Mono: 0.3% Stereo: 0.5% TONE ±6 dB at 100 Hz and 10 kHz Sampling frequency 48 kHz (OPTICAL IN) 96 kHz (COAXIAL IN) FM tuner section Tuning range 87.5 - 108.0 MHz Separation 45 dB at 1 kHz Frequency response 30 Hz - 15 kHz +0.5/-2 dB Selectivity 60 dB at 400 kHz Antenna terminals 75 ohms, unbalanced - Continued on next page - FM STEREO FM-AM RECEIVER 9-929-587-11 2001B1600-1 © 2001.2 Sony Corporation Audio Entertainment Group General Engineering Dept.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

STR-DE475
US Model
Canadian Model
AEP Model
UK Model
Australian Model
Chinese Model
E Model
SERVICE MANUAL
FM STEREO FM-AM RECEIVER
Sony Corporation
Audio Entertainment Group
General Engineering Dept.
9-929-587-11
2001B1600-1
© 2001.2
— Continued on next page —
SPECIFICATIONS
Ver 1.0
2001. 02
Manufactured under license from Dolby Laboratories Licensing
Corporation.
“DOLBY” the double-D symbol
;
“AC-3” and “Pro Logic” are
trademarks of Dolby Laboratories Licensing Corporation.
Outputs
MD/TAPE (OUT):
VIDEO (AUDIO OUT):
Voltages:
250 mV,
Impedance:
10 kilohms
SUB WOOFER:
Voltage: 2 V
Impedance :
1 kilohms
PHONES:
Accepts low– and
high-impedance
headphones
TONE
±
6 dB at 100 Hz
and 10 kHz
Sampling frequency
48 kHz (OPTICAL IN)
96 kHz (COAXIAL IN)
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna terminals
75 ohms, unbalanced
Intermediate
frequency
10.7 MHz
Sensitivity
Mono:
18.3 dBf,
2.2
µ
V/75 ohms
Stereo:
38.3 dBf,
22.5
µ
V/75 ohms
Usable sensitivity
11.2 dBf, 1
µ
V/75 ohms
S/N
Mono:
76 dB
Stereo:
70 dB
Harmonic distortion at 1 kHz
Mono:
0.3%
Stereo: 0.5%
Separation
45 dB at 1 kHz
Frequency response
30 Hz - 15 kHz
+0.5/-2 dB
Selectivity
60 dB at 400 kHz
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION:
With 8 ohm loads, both
channels driven, from 40 -
20,000 Hz; rated 80 watts
per channel minimum RMS
power, with no more than
0.09% total harmonic
distortion from 250
milliwatts to rated output
(USA model only).
Amplifier section
POWER OUTPUT
US, Canadian :
Rated Power Output at Stereo mode
(8 ohms 40 Hz - 20 kHz, THD 0.09%)
80 W + 80 W
US, Canadian, AEP, UK :
Reference Power Output
(8 ohms 1 kHz, THD 0.7%)
Front
1)
: 80 W/ch
Center
1)
: 80 W
Surround
1)
: 80 W/ch
EXCEPT :
EXCEPT :
Rated Power Output at Stereo mode
(8 ohms 1kHz, THD 0.7%)
80 W + 80 W
2)
Reference Power Output
2)
(8 ohms 1 kHz, THD 10%)
Front
1)
:
90 W/ch
Center
1)
: 90 W
Surround
1)
:
90 W/ch
1) Depending on the sound field settings and
the sources, there may be no sound output.
2) Measured under the following conditions:
Area code
Power requirement
E, Australian
240 V AC, 50 Hz
Chinese
230 V AC, 50 Hz
Taiwan
110 V AC, 50 Hz
Frequency response
MULTI CH IN, CD,
MD/TAPE, DVD/LD,
TV/SAT, VIDEO:
20 Hz – 20 kHz
0/– 0.5 dB (sound field,
and tone bypassed)
Inputs (Analog)
MULTI CH IN, CD,
MD/TAPE, DVD/LD,
TV/SAT, VIDEO:
Sensitivity:
250 mV
Impedance:
50 kilohms
S/N
3)
:
85 dB
(A, 250 mV
4)
)
3) INPUT SHORT
4) Weighted network, input level
Inputs (Digital)
DVD/LD (coaxial):
Sensitivity:
Impedance:
75 ohms
S/N:
100 dB
(A, 20 kHz LPF)
TV/SAT (Optical):
Sensitivity:
Impedance:
S/N:
100 dB
(A, 20 kHz LPF)