Sony STR-DE997B Operating Instructions
Sony STR-DE997B - Currently Not Available Manual
 |
View all Sony STR-DE997B manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony STR-DE997B manual content summary:
- Sony STR-DE997B | Operating Instructions - Page 1
FM/AM Receiver Operating Instructions Owner's Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. STR-DE997 ©2004 Sony - Sony STR-DE997B | Operating Instructions - Page 2
magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING This equipment has been tested and found to comply with - Sony STR-DE997B | Operating Instructions - Page 3
About This Manual • The instructions in this manual is for model STR-DE997. Check your model number by looking at the lower right corner of the front panel. • The instructions in this manual describe the controls on the receiver. You can use the controls on the supplied remote if they have the same - Sony STR-DE997B | Operating Instructions - Page 4
up the speakers 18 6: Adjusting the speaker levels and balance 21 - TEST TONE Amplifier Operation Selecting the component 23 Listening to multi channel sound .......... 24 - MULTI CH IN Listening to FM/AM radio 24 Presetting radio stations 25 Changing the display 26 About the indications in - Sony STR-DE997B | Operating Instructions - Page 5
1c beginning on page 7 describe how to hook up your components to this receiver. Before you begin, refer to "Connectable audio decoded by the component's internal multi channel decoder through this receiver. c) Model equipped only with AUDIO OUT L/R jacks, etc. d) Model with component video - Sony STR-DE997B | Operating Instructions - Page 6
: yellow (video) to yellow; white (left, audio) to white; and red (right, audio) to red. • When connecting optical digital cords, insert the cord plugs straight in until they click into place. • Do not bend or tie optical digital cords. If you have Sony components with CONTROL A1II/CONTROL S jacks - Sony STR-DE997B | Operating Instructions - Page 7
SIGNAL GND L CONTROL S S-VIDEO S-VIDEO STATUS STATUS S-VIDEO S-VIDEO S-VIDEO IN IN OUT IN OUT IN OUT VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT L L L CTRL MONITOR A1 II TV/SAT IN CO R AUDIO IN AUDIO IN R AUDIO OUT AUDIO IN R AUDIO OUT AUDIO IN SUB WOOFER - Sony STR-DE997B | Operating Instructions - Page 8
L CONTROL S Y S-VIDEO S-VIDEO STATUS STATUS S-VIDEO S-VIDEO S-VIDEO IN IN OUT IN OUT IN OUT VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT L L L CTRL MONITOR A1 II TV/SAT IN DVD MONITOR IN OUT COMPONENT VIDEO (ASSIGNABLE) R AUDIO IN AUDIO IN R AUDIO OUT AUDIO - Sony STR-DE997B | Operating Instructions - Page 9
not output when you play a Super Audio CD on the Super Audio CD player connected to the SA-CD/CD OPTICAL IN or SA-CD/CD COAXIAL IN jack on this receiver. Connect to the analog input jacks (SA-CD/CD IN jacks). Refer to the operating instructions supplied with the Super Audio CD player. 9US - Sony STR-DE997B | Operating Instructions - Page 10
SIGNAL GND L CONTROL S S-VIDEO S-VIDEO STATUS STATUS S-VIDEO S-VIDEO S-VIDEO IN IN OUT IN OUT IN OUT VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT L L L CTRL MONITOR A1 II TV/SAT IN CO R AUDIO IN AUDIO IN R AUDIO OUT AUDIO IN R AUDIO OUT AUDIO IN SUB WOOFER - Sony STR-DE997B | Operating Instructions - Page 11
CONTROL S Y S-VIDEO S-VIDEO STATUS STATUS S-VIDEO S-VIDEO S-VIDEO IN IN OUT IN OUT IN OUT VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT L L L CTRL MONITOR A1 II TV/SAT IN DVD MONITOR IN OUT COMPONENT VIDEO (ASSIGNABLE) R AUDIO IN AUDIO IN R AUDIO OUT AUDIO - Sony STR-DE997B | Operating Instructions - Page 12
Hooking up audio components For details on the required cords (A-H), see page 6. Turntable A DIGITAL (ASSIGNABLE) OPTICAL TV/SAT IN MD/ TAPE IN MD/ TAPE OUT SA-CD/ CD IN ANTENNA AM DVD IN SA-CD/ CD IN COAXIAL SIGNAL GND L CCOONNTTRROOLL SS S-VIDEO S-VIDEO STATUS STATUS S-VIDEO S-VIDEO S-VIDEO - Sony STR-DE997B | Operating Instructions - Page 13
L CONTROL S Y S-VIDEO S-VIDEO STATUS STATUS S-VIDEO S-VIDEO S-VIDEO IN IN OUT IN OUT IN OUT VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT L L L CTRL MONITOR A1 II TV/SAT IN DVD MONITOR IN OUT COMPONENT VIDEO (ASSIGNABLE) R AUDIO IN AUDIO IN R AUDIO OUT AUDIO - Sony STR-DE997B | Operating Instructions - Page 14
S-VIDEO S-VIDEO STATUS STATUS S-VIDEO S-VIDEO S-VIDEO IN IN OUT IN OUT IN OUT VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT L L L CTRL MONITOR A1 II TV/SAT IN CO R AUDIO IN AUDIO IN R AUDIO OUT AUDIO IN R AUDIO OUT AUDIO IN SUB WOOFER TV/SAT DVD VIDEO 2 VIDEO - Sony STR-DE997B | Operating Instructions - Page 15
Getting Started 3: Connecting speakers Connect your speakers to the receiver. This receiver allows you to use a 7.1 channel speaker system. To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a sub - Sony STR-DE997B | Operating Instructions - Page 16
e Ee Ee Ee E A A A S-VIDEO S-VIDEO S-VIDEO OUT IN OUT Y R + FRONT A - - L + R L VIDEO OUT VIDEO IN VIDEO OUT L CTRL MONITOR A1 II TV/SAT IN DVD MONITOR IN OUT COMPONENT VIDEO (ASSIGNABLE) FRONT B SPEAKERS R AUDIO OUT AUDIO IN SUB WOOFER VIDEO 1 PRE OUT L L CENTER - Sony STR-DE997B | Operating Instructions - Page 17
for the operation. 1 Press ?/1 to turn off the receiver. 2 Hold down ?/1 for 5 seconds. "PUSH ENTER" flashes in the display. 3 Press ENTER. "MEMORY CLEARING" appears in the display for a while, then "MEMORY CLEARED" appears. The following are reset to their factory settings. • All settings in - Sony STR-DE997B | Operating Instructions - Page 18
the speakers connected to this receiver. 1 Press ?/1 to turn on the receiver. 2 Press MAIN MENU Setup Guide"). • NO If you want to adjust the settings of each speaker manually, select channel surround sound, select "SMALL" to activate the bass redirection circuitry and output the front channel - Sony STR-DE997B | Operating Instructions - Page 19
" and "SMALL" settings for each speaker determine whether the internal sound processor will cut the bass signal from that channel. When the bass is cut from a channel, the bass redirection circuitry sends the corresponding bass frequencies to the sub woofer or other "LARGE" speakers. However, since - Sony STR-DE997B | Operating Instructions - Page 20
speakers and both surround back speakers are not placed an equal distance from your listening position, set the distance to the closest speaker. Tip The receiver lets you to input the speaker position in terms of distance. However, it is not possible to set the center speaker further than the front - Sony STR-DE997B | Operating Instructions - Page 21
to the above explanation, we recommend that you playback multi channel surround encoded software and select the setting that provides a good . Use the remote for the operation. Tip The receiver employs a test tone with a frequency centered at 800 Hz. 1 Press ?/1 to turn on the receiver. 2 Press - Sony STR-DE997B | Operating Instructions - Page 22
Note Although these adjustments can also be made via the front panel using the LEVEL menu (when the test tone is output, the receiver switches to the LEVEL menu automatically), we recommend you follow the procedure described above and adjust the speaker levels from your listening position using the - Sony STR-DE997B | Operating Instructions - Page 23
Amplifier Operation Amplifier Operation Selecting the component 1 Turn INPUT SELECTOR to select the input. To select the Display/light up VCR VIDEO 1 or VIDEO 2 Camcorder or video game VIDEO 3 DVD player DVD Satellite tuner TV/SAT MD or tape deck MD/TAPE Super Audio CD or CD SA-CD/CD - Sony STR-DE997B | Operating Instructions - Page 24
DECODING indicator lights up when the receiver is decoding multi channel sources. However, this indicator does not light up if you select 2CH STEREO mode. Listening to FM/AM radio You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the - Sony STR-DE997B | Operating Instructions - Page 25
Amplifier Operation Direct tuning You can enter the frequency of the station you want directly. Use the remote for the operation. 1 Move the easy scroll key (PUSH) to select TUNER. 2 Press PUSH repeatedly to select the FM SELECTOR to select the FM or AM band. The last received station is tuned in. - Sony STR-DE997B | Operating Instructions - Page 26
preset stations 1 Turn INPUT SELECTOR to select the FM or AM band. The last received station is tuned in. 2 Press PRESET TUNING ...yA0yB1yB2y...yB0T tC0y...yC2yC1T Using the remote 1 Move the easy scroll key (PUSH) to select TUNER. 2 Press PUSH repeatedly to select the FM or AM band. 3 Press PRESET - Sony STR-DE997B | Operating Instructions - Page 27
Amplifier Operation YES" (page 18) and the audio signal is output from the SUB WOOFER jacks. the LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. when using the receiver to tune in radio stations, etc. See pages 24-26 for tuner operations. L D.ASSIGN: - Sony STR-DE997B | Operating Instructions - Page 28
" is selected. P SLEEP: Lights up when sleep timer is activated. Q Playback channel indicators: The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speakers settings). L (Front Left - Sony STR-DE997B | Operating Instructions - Page 29
the display and the receiver switches to the 2CH STEREO mode. Note No sound is output from the sub woofer in the 2CH STEREO mode. To listen to the 2 channel stereo sources using the front left/right speakers and a sub woofer, set to the A.F.D. mode. Listening to analog audio (ANALOG DIRECT) You can - Sony STR-DE997B | Operating Instructions - Page 30
channel audio sources. This receiver can reproduce 2 channel sound in 5 channels through Dolby Pro Logic II; 7 channels through Dolby Pro Logic IIx; 6 channels through DTS Neo:6 or 4 channels , this mode can reproduce sound in 5.1 channel when watching videos of overdubbed or old movies. x PLII - Sony STR-DE997B | Operating Instructions - Page 31
mode decoding. This setting is ideal for video game softwares. x PLIIX MOVIE (PRO LOGIC audio signal is 2 channel stereo or if the source signal does not include a LFE signal, the receiver DCS Reproduces the sound characteristics of the Sony Pictures Entertainment "Cary Grant Theater" cinema - Sony STR-DE997B | Operating Instructions - Page 32
DVDs (etc.), with multi channel surround effects. You can reproduce the sound characteristics of Sony Pictures Entertainment's dubbing studio in headphones. Note If you connect a pair of headphones while a sound field is operating, the system will automatically switch to "HP 2CH" if using a sound - Sony STR-DE997B | Operating Instructions - Page 33
STEREO" or press A.F.D. repeatedly to select "A.F.D. AUTO". Tips • The receiver lets you apply the last selected sound field to an input whenever it select the decoding mode for the surround back signals of the multi channel input stream. By decoding the surround back signal of DVD software (etc - Sony STR-DE997B | Operating Instructions - Page 34
input stream. When you select "OFF" Surround back decoding is not performed. When you select "AUTO" When the input stream contains the 6.1 channel decode flaga), the appropriate decoder is applied to decode the surround back signal. Input stream Dolby Digital 5.1 Dolby Digital EXb) DTS 5.1 DTS - Sony STR-DE997B | Operating Instructions - Page 35
SAT OPTICAL IN jack and its analog audio/video output jacks to the VIDEO 2 AUDIO IN and VIDEO IN jacks on the receiver. Then, assign the DVD COAXIAL's digital audio input to DVD (DVD-DVD) and the TV/SAT OPTICAL's digital audio input to VIDEO 2 (TV/SAT-VIDEO 2). 1 Press MAIN MENU repeatedly to select - Sony STR-DE997B | Operating Instructions - Page 36
each input". 6 Press ENTER. Selectable component video inputs for each input DVD DVD, VIDEO 1, VIDEO 2, VIDEO 3 TV/SAT TV/SAT, VIDEO 1, VIDEO 2, VIDEO 3 Note You cannot assign a visual input to more than one component video input. Switching the audio input mode for digital components - INPUT MODE - Sony STR-DE997B | Operating Instructions - Page 37
for effect level parameter. The effect level parameter settings are stored individually for each sound field. 1 Start playing a source encoded with multi channel surround effects (DVD, etc.). 2 Press MAIN MENU repeatedly to select " LEVEL ". 3 Turn MENU to select the parameter you want to adjust - Sony STR-DE997B | Operating Instructions - Page 38
presence" of the surround effect. Resetting sound fields to the initial settings Use the buttons on the receiver for the operation. 1 Press ?/1 to turn off turn on the equalizer. 1 Start playing a source encoded with multi channel surround effects (DVD, etc.). 2 Press MAIN MENU repeatedly to select - Sony STR-DE997B | Operating Instructions - Page 39
mode (page 30). x DEC. PRI. XXXX (Digital audio input decoding priority) Lets you specify the input mode for . The initial setting is "DEC. PRI. AUTO" for VIDEO 3 and TV/SAT, and "DEC. PRI. PCM" input, the sound is output. However, this receiver cannot decode DTS-CD when set to "DEC. PRI. - Sony STR-DE997B | Operating Instructions - Page 40
POWER SAVE XXX (CONTROL A1II power save function) • ON Lets you save the power consumption of the receiver during standby mode video input" on page 36. x DIGITAL ASSIGN (Digital audio input assignment) Lets you assign the digital audio input to other input. For details, see "Assigning the audio - Sony STR-DE997B | Operating Instructions - Page 41
to select the correct character. 6 Press ENTER to store the index name. Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. Use the remote for the operation. 1 Press ALT to light up the button. 2 Press SLEEP repeatedly while the power is on. Each time you - Sony STR-DE997B | Operating Instructions - Page 42
Recording on an audio tape or MiniDisc You can record on a cassette tape or MiniDisc using the receiver. See the operating instructions of your cassette • The analog audio signals of the current input is output from the MD/TAPE OUT jacks. • The signals input to the MULTI CHANNEL INPUT jacks are - Sony STR-DE997B | Operating Instructions - Page 43
You can record from a VCR, a TV or a DVD using the receiver. You can also add audio from a variety of audio sources when editing a video tape. See the operating instructions of your VCR or DVD player if you need help. 1 Select the program source to be recorded. 2 Prepare the component for playing - Sony STR-DE997B | Operating Instructions - Page 44
Main receiver Audio/video components STR-DE997 2ND ZONE OUT 2nd zone Speaker Speaker Amplifier/Receiver 44US CONTROL A1II Control System The CONTROL A1II Control System was designed to simplify the operation of audio systems composed of separate Sony components. CONTROL A1II connections - Sony STR-DE997B | Operating Instructions - Page 45
and 1 receiver). (You may be able to connect more than one CD player or MD deck, depending on the model. Refer to the operating instructions supplied with the respective component for details.) Example Amplifier CD MD (Reciever) player deck Tape Other deck components In the CONTROL A1II control - Sony STR-DE997B | Operating Instructions - Page 46
S OUT jack on this unit Example IN OUT IN OUT IN TV VCR Tuner OUT Receiver .> mM - N X x F G g f O Remote The remote sensor on this unit receives remote codes the same way as the remote sensor on the CONTROL S IN component. This is useful if you place the other component away from this - Sony STR-DE997B | Operating Instructions - Page 47
VOL RETURN/EXIT TV/ MAIN TV CH VIDEO MENU WIDE ON SCREEN qs wj wh wg wf wd ws wa w; ql qk qj qh qg qf qd The tables below show the settings of each button. Remote Operations Button A.F.D. 5 Receiver ALT wa Remote Function Selects the decoding mode for audio sound. When ALT button lights up - Sony STR-DE997B | Operating Instructions - Page 48
Remote Button Operations Function ANT 7 VCR Selects output signal from the antenna terminal: TV signal or VCR program. AUDIO 5 TV/VCR/ DVD player Changes the sound to Multiplex, Bilingual or Multi channel TV Sound. AV MENU VCR/ Displays menu. q; Satellite tuner/ DVD player AV ?/1 wh TV/ - Sony STR-DE997B | Operating Instructions - Page 49
signal: TV input or video input. TV VOL TV +/- qa TV ?/1 1 TV WIDE qd TV Adjusts the volume of the TV. Turns the TV on or off. Selects the wide picture mode. * Only for Sony TVs with the picture-in-picture function. Remote Button Operations Function 1-9 5 and Receiver 0/10 6 Use with SHIFT - Sony STR-DE997B | Operating Instructions - Page 50
Audio CD or compact disc. TUNER To listen to radio programs. PHONO To listen to turntable. MULTI To listen and watch components connected to the MULTI CHANNEL INPUT jacks on the receiver. M1, M2* (Macro List) * For details, see page 56. Notes • When you select the input (VIDEO 1, VIDEO - Sony STR-DE997B | Operating Instructions - Page 51
been memorized, you can use those components as part of your system. Furthermore, you can also program the remote for Sony components that the remote is unable to control. Note that the remote can only control components that accept infrared wireless control signals. 1 Hold down RM SET UP and press - Sony STR-DE997B | Operating Instructions - Page 52
Replace TV/VIDEO and WIDE buttons remote To clear all programmed and learned signals, do the following to reset the remote control non-Sony components and also Sony components that the remote is normally unable to control. Since the remote signal that a component accepts differs depending on the model - Sony STR-DE997B | Operating Instructions - Page 53
Operations Using the Remote RM-LG113 To control a DAT deck Maker SONY PIONEER Code(s) 203 219 To control an MD deck Maker SONY DENON JVC KENWOOD Code(s) 301 302 303 304 To control a tape deck Maker SONY DENON KENWOOD NAKAMICHI PANASONIC PHILIPS PIONEER TECHNICS YAMAHA Code(s) 201, 202 204, - Sony STR-DE997B | Operating Instructions - Page 54
learn an operation for a CD player, select SA-CD. 3 Press PUSH. 4 Press the button you want to use for the Learning function. The indicator turns off while a valid button is pressed, then flashes slowly. 5 Point the remote control code receiver section of the remote towards the receiver/transmitter - Sony STR-DE997B | Operating Instructions - Page 55
Operations Using the Remote RM-LG113 6 Press the appropriate button on the remote control to be learned to send the remote button code. Lightly pressing the button once should be sufficient. If learning is completed successfully, the indicator slowly flashes twice and the remote automatically exits - Sony STR-DE997B | Operating Instructions - Page 56
remote control code receiver section of the remote towards the receiver/transmitter on the remote control to be learned. 5 Press the appropriate button on the remote control to be learned to send the remote up in step 1, the batteries are weak. Replace both batteries. - If the indicator lights 4 - Sony STR-DE997B | Operating Instructions - Page 57
the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. If you have any question or problem concerning your receiver, please consult your nearest Sony dealer. 57US - Sony STR-DE997B | Operating Instructions - Page 58
the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. There is no sound or only the remote to cancel the muting function. There is no sound from a specific component. • Check that the component is connected correctly to the audio input - Sony STR-DE997B | Operating Instructions - Page 59
more than 48 kHz. Dolby Digital or DTS multi channel sound is not reproduced. • Check that the playing input jacks of this receiver, check the audio setting (settings for the audio output) of the ground wire to a gas pipe. Outdoor FM antenna Receiver ANTENNA AM Ground wire (not supplied) To - Sony STR-DE997B | Operating Instructions - Page 60
persists, turn off the receiver and consult your nearest Sony dealer. If you are unable to remedy the problem using the troubleshooting guide Clearing the receiver's memory may remedy the problem (page 17). However, note that all memorized settings will be reset to their factory settings and - Sony STR-DE997B | Operating Instructions - Page 61
channels driven, from 20 - 20,000 Hz; rated 110 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section Power output Models Outputs (Analog) MD/TAPE (OUT), VIDEO 1, 2 (AUDIO OUT) SUB WOOFER Voltage: 500 mV - Sony STR-DE997B | Operating Instructions - Page 62
(Approx.) 430 × 157.5 × 371 mm (16 7/8 × 6 2/8 × 14 5/8 inches) including projecting parts and controls Mass (Approx.) 10.7 kg (23 lb 10 oz) Supplied accessories FM wire antenna (1) AM loop antenna (1) Remote commander RM-LG113 (1) R6 (size-AA) batteries (2) For details on the area code of - Sony STR-DE997B | Operating Instructions - Page 63
(OFF/A/B/A+B) 6 (16, 42, 58) SURR BACK DECODING ql (33) TUNER FM/AM (indicator) wg (23) TUNING +/- eg (24, 62) TV/SAT (indicator) wk (23) VIDEO 1 (indicator) es (23) VIDEO 2 (indicator) ea (23) VIDEO 3 (indicator) e; (23) VIDEO 3 INPUT (jacks) ef (13) NUMBERS AND SYMBOLS 2CH (button/indicator) qf - Sony STR-DE997B | Operating Instructions - Page 64
26 Clearing receiver's memory 17 26 R Recording on a video tape 43 on an audio tape or MD 42 S resetting 38 selecting 31-33 Speakers adjusting speaker level and balance 21 connection 15 placement 15 Supplied accessories 62 T Test tone 21 Tuning automatically 24 directly 25 preset stations 25 Sony
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
 |
 |
©2004 Sony Corporation
4-255-361-
11
(1)
FM Stereo
FM/AM Receiver
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear of the unit. Record the serial
number in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No.
Serial No.
STR-DE997