Sony STR-DE997B Operating Instructions - Page 45
Other Operations, Using CONTROL S Control, System
View all Sony STR-DE997B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Other Operations If, however, you have a Sony CD changer with VIDEO OUT jacks, set the command mode to "CD 2" and connect the changer to the VIDEO 2 jacks on the amplifier (receiver). Connections You can connect up to 10 CONTROL A1II compatible components in any order. However, you can connect only one of each type of component (i.e., 1 CD player, 1 MD deck, 1 tape deck and 1 receiver). (You may be able to connect more than one CD player or MD deck, depending on the model. Refer to the operating instructions supplied with the respective component for details.) Example Amplifier CD MD (Reciever) player deck Tape Other deck components In the CONTROL A1II control system, the control signals flow both ways, so there is no distinction of IN and OUT jacks. If a component has more than one CONTROL A1II jack, you can use either one, or connect different components to each jack. Some CONTROL A1 compatible components are supplied with a connecting cord as an accessory. In this case, use the connecting cord for your connection. When using a commercially available cord, use a monaural mini-plug cord less than 2 meters long, with no resistance. Basic Functions The input selector on the receiver automatically switches to the correct input when you press the play button on one of the connected components (Auto input selection). The CONTROL A1II functions will operate as long as the component you want to operate is turned on, even if all of the other connected components are not turned on. Note When recording, do not play any components other than the recording source. It will cause the automatic input selection to operate. Using CONTROL S Control System If you have a CONTROL S-compatible Sony TV, satellite tuner, monitor, DVD player or VCR, use a monaural mini-plug cord (not supplied) to connect the CONTROL S IN (for TV, satellite tuner, or monitor) or CONTROL S OUT (for VCR, etc.) jack on the receiver to the appropriate CONTROL S jack on the respective component. Refer to the operating instructions supplied with your TV, satellite tuner, monitor, VCR, etc., for details. If you connect the CONTROL S OUT jack on another component to the CONTROL S IN jack on this unit Example TV, VCR, OUT tuner, monitor, etc. IN Receiver .> mM - N X x F G g f O Remote The remote sensor on the CONTROL S OUT component receives remote codes the same way as the remote sensor on this unit. This is useful if you have placed this unit in a rack, etc. continued 45US