Sony STR-DG500 Operating Instructions - Page 73

AM tuner section Tuning range Area code Tuning scale 10 kHz step 9 kHz step U, CA 530 - 531 - 1,710 kHz6) 1,710 kHz6) E2 530 - 531 - 1,610 kHz6) 1,602 kHz6) CEL, CEK, AU, - TW, KR, TH6, SP 531 - 1,602 kHz AR 530 - - 1,610 kHz Intermediate frequency 450 kHz Usable sensitivity 50 dB µ/m (at 1,000 kHz or 999 kHz) 6)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down TUNING MODE, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. Video section Inputs/Outputs Video: 1 Vp-p/75 ohms COMPONENT VIDEO: Y: 1 Vp-p/75 ohms PB/CB/B-Y: 0.7 Vp-p/ 75 ohms PR/CR/R-Y: 0.7 Vp-p/ 75 ohms 80 MHz HD Pass Through General Power requirements Area code Power requirements U, CA 120 V AC, 60 Hz CEL, CEK 230 V AC, 50/60 Hz AU 240 V AC, 50 Hz AR, KR, TH6 220 - 230 V AC, 50/60 Hz E2 120/220/240 V AC, 50/60 Hz TW 110 V AC, 50/60 Hz SP 230 - 240 V AC, 50/60 Hz Power consumption Area code Power consumption U, CEL, CEK, AU, 220 W KR, AR, E2 TH6, SP 200 W CA 300 VA TW 500 W Power consumption (during standby mode) 0.2 W Dimensions (w/h/d) (Approx.) 430 × 157.5 × 316 mm (16 7/8 × 6 2/8 × 12 4/8 inches) including projecting parts and controls Mass (Approx.) 8.0 kg (17 lb 11 oz) Supplied accessories FM wire antenna (1) AM loop antenna (1) Remote commander RM-AAU005 (1) R6 (size-AA) batteries (2) Optimizer microphone ECM-AC2 (1) For details on the area code of the component you are using, see page 3. Design and specifications are subject to change without notice. Additional Information 73GB