Sony TDM-BT1 Instruction Manual - Page 10
Initializing, To finish connecting - bluetooth
UPC - 027242708617
View all Sony TDM-BT1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
To finish connecting Terminate the BLUETOOTH connection by any of the operations below. - Operate the BLUETOOTH stereo audio source device to terminate the connection. For details, refer to the operating instructions supplied with the device. - Turn off the BLUETOOTH stereo audio source device. - Press the OPR button momentarily. Until the disconnection is complete, the LED status indicator flashes. Note In the following cases, you need to make the BLUETOOTH connection again. - The BLUETOOTH connection is disconnected once. - The power of the BLUETOOTH stereo audio source device does not turn on, or the BLUETOOTH signal is off. - The BLUETOOTH stereo source device is in sleep mode. - The BLUETOOTH connection is not made. To turn off the BLUETOOTH signal Even if you stop BLUETOOTH communication with the BLUETOOTH stereo audio device, this unit continues to send out signals. You can stop the signal completely by the operations below. - When the LED is on: Press momentarily the OPR button to stop BLUETOOTH communication with the BLUETOOTH stereo audio device. Then press momentarily the OPR button again to turn off the signal from the unit. - When the LED is flashing: Press momentarily the OPR button to turn off the signal from the unit. Initializing You can reset this unit to its default setting and delete all pairing information. If this unit is turned on, use a thin pointed object (such as a paper clip) to press the RESET button to initialize this unit. The LED status indicator flashes twice, and this unit is reset to the default. All pairing information is deleted. Note If this unit is connected to a BLUETOOTH device, you cannot reset this 10 unit. US