Sony TMR-BT8iP Operating Instructions - Page 11
Continued, Press, and hold the power button of this unit for 7 seconds or more to, enter
UPC - 027242724327
View all Sony TMR-BT8iP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Press and hold the POWER button of the bluetooth receiving device for 7 seconds or more to standby for pairing while the unit is turned off. Notes Passcode* of this unit is fixed at "0000", "1234" or "8888." Depending on the Bluetooth receiving device, it may be necessary to input the passcode (in this case, "0000", "1234" or "8888"). This unit cannot be paired with a Bluetooth receiving device whose passcode is not "0000", "1234" or "8888." If the Bluetooth receiving device requires a passcode, input "0000." * Passcode may be called "Passkey," "PIN code," "PIN number," or "Password." 5 Press and hold the power button of this unit for 7 seconds or more to enter "Pairing in process." After about 1 second, the indicator will flash twice but keep pressing the power button. Notes When first power on this unit after initialize, this unit will enter the "Pairing in process" automatically. The pairing information is initialized if you press and hold the power button for 15 seconds. The indicator lights up for 5 seconds before the initialization starts. Release the button immediately when the indicator lights up. When the indicator of this unit flashes quickly, stop pressing it. This unit enters "Pairing in process." This unit's indicator status will vary as follows, and pairing is established with the Bluetooth receiving device. Continued US 11