Sony UP-27MD Operating Instructions - Page 78
Specifications
View all Sony UP-27MD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Specifications Power Requirements 100 V to 240 V , 50/60 Hz Input Current 1.7 A to 1.0 A Operating Temperature 5 °C to 35 °C (41 °F to 95 °F) Operating Humidity 20% to 80% (no condensation allowed) Operating Pressure 700 hPa to 1060 hPa Storage and Transport Temperature -20 °C to +60 °C (-4 °F to +140 °F) Storage and Transport Humidity 20% to 80% (no condensation allowed) Storage and Transport Pressure 700 hPa to 1060 hPa Dimensions Approx. 212 × 98 × 398 mm (8 3/8 × 3 7/8 × 15 3/4 inches) (w × h × d) excluding largest protrusions. Weight Approx. 5.7 kg (12 lb 9.1 oz) (printer only) Printing System Dye transfer sublimation thermal printing, YMC 3-color layered printing Thermal Head 423 dpi Print Gradations 8-bit processing each for YMC (yellow, magenta, cyan) Picture Elements Using UPC-21S: 1600 × 1260 dots Using UPC-21L: 2132 × 1600 dots Printing Time Using UPC-21S: Approx. 19 seconds (high speed print) Using UPC-21L: Approx. 29 seconds (high speed print) AC IN Connector Power input SDI IN Connector BNC type (1) SD: SMPTE ST 259 compliant HD: SMPTE ST 292-1 compliant 3G: SMPTE ST 424 compliant SDI OUT Connector BNC type (1) SD: SMPTE ST 259 compliant HD: SMPTE ST 292-1 compliant 3G: SMPTE ST 424 compliant Control Connectors REMOTE (stereo mini jack) (1) For optional FS-24 Foot Switch connector RS-232C (D-sub 9 pin) (1) Supplied Accessories Paper feed tray (1) Stopper (1) Before Using This Printer (1) CD-ROM (instructions for use) (1) Cleaning cartridge (1) Service Contact List (1) Information for Customers in Europe (1) Optional Accessories Color Printing Pack UPC-21S: 240 sheets (80 sheets × 3) Color Printing Pack UPC-21L: 200 sheets (50 sheets × 4) FS-24 Foot Switch Caution Do not use the FS-24 in a place (such as an operating room) exposed to liquids, etc., since the FS-24 conforms to IPX3 waterproof Ingress Protection Rating. In such a place, use a product which conforms to IPX6 or higher. Remote control via the REMOTE connector If you send the following pulse signals to the REMOTE connector, the printer will function according to settings in "Selecting controls using the device connected to the REMOTE connector" (page 71). Timing pulse for REMOTE connector input REMOTE pin alignment MIN BUSY GND 78