Sony UPDR80 Operating Instructions - Page 14
Removing Scraps
View all Sony UPDR80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Operation When removing and then reloading a partially used paper roll If the paper roll is not tightly rolled, roll it up more tightly before reloading it. Removing Scraps In the following cases, pull out the paper cover and remove scraps that have accumulated in the scrap receptacle. • When replacing the ink ribbon and paper • When the CLEANING and ALARM indicators light Note When removing a partially used paper roll, be sure to place the media tray on a stable surface before beginning. If you drop the media tray while it contains a paper roll, it could cause personal injury. When removing and inserting the media tray, be sure to use both hands, with one hand holding the handle and the other hand supporting the media tray from the bottom. 1 Pull out the paper cover horizontally as shown. Scrap receptacle Paper cover Notes • Always grasp the body of the paper cover when pulling it out. If you pull the paper cover by the stopper, the stopper may detach and the paper cover may fall off and cause injuries. • When you pull out the paper cover, be sure to remove any scraps that may have fallen onto the printer. 2 Empty the scrap receptacle. Scrap receptacle 14 Removing Scraps Scraps Note Do not strike the paper cover with hard objects to remove the scraps. Doing so may result in damage.