Sony VGP-PRSR1 Operating Instructions - Page 1
Sony VGP-PRSR1 - VAIO Port Replicator Manual
UPC - 027242744974
View all Sony VGP-PRSR1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Docking Station VGP-PRSR1 Operating Instructions / Mode d'emploi / Manual de instrucciones / Manual de instruções 4-105-594-11(1) ©2008 Sony Corporation / Printed in China English WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. • Use your product only with the AC adapter and power cord supplied with your computer. • To disconnect it completely from the main voltage, unplug the AC adapter. • The socket-outlet shall be installed near the equipment and shall be easily accessible. For customers in the USA Owner's Record The model number and serial number are located on the bottom of your docking station. Record the serial number in the space provided here. Refer to the model and serial number when you call your Sony Service Center. Model No. VGP-PRSR1 Serial No WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Only peripherals (computer input/output devices, terminals, printers, etc.) that comply with FCC Class B limits, may be attached to this computer product. Operation with noncompliant peripherals is likely to result in interference to radio and television reception. All cables used to connect peripherals must be shielded and grounded. Operation with cables connected to peripherals that are not shielded and grounded may result in interference to radio and television reception. If you have any questions about this product, you can reach the Sony Customer Infomation Service Center at 1-888-476-6972 in the United States or 1-800-961-7669 in Canada; or write to the Sony Customer Information Service Center at 12451 Gateway Blvd, Ft. Meyers, FL 33913, or find Sony Customer Service on the Web at http://www.sony.com/pcsupport. Declaration of Conformity Trade Name: SONY Model No.: VGP-PRSR1 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 (This phone number is for FCC-related matters only.) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For customers in Canada This Class B digital apparatus complies with Canadian ICES-003. VAIO is a trademark of Sony Corporation. ATI Mobility Radeon™ is a trademark of Advanced Micro Devices, Inc. Before use Before using the docking station, please read this manual thoroughly and retain it for future reference. See also the manuals provided with your computer for more information about connecting the docking station. The Sony VGP-PRSR1 docking station is designed for Sony personal computers. However, it may not be used with some models. Specifications Connectors Docking station connector : Custom connector (1) USB : Type-A connector (3) *1 External display output : a MONITOR ( ) : Analog RGB (mini D-sub 15 pin) (1) DVI-D ( ) : Digital (DVI-D type) (1)*2 LAN connector : LAN (10BASE-T/100BASE-TX/1000BASE-T) (1)*1 Power requirement (AC adapter *3) Input: 100 - 240 V AC, 1.5 A, 50/60 Hz (AC power cord supplied with your computer.) Output: 19.5 V DC, 4.7 A Operating temperature 41°F to 95°F (5°C to 35°C) (temperature gradient less than 18°F (10°C)/hour) Operating humidity 20% to 80% (not condensed), provided that humidity is less than 65% at 95°F (35°C) (hygrometer reading of less than 84°F (29°C)) Storage temperature -4°F to +140°F (-20°C to +60°C) (temperature gradient less than 18°F (10°C)/hour) Storage humidity 10% to 90% (not condensed), provided that humidity is less than 20% at 140°F (60°C) (hygrometer reading of less than 95°F (35°C)) Dimensions Approx. 13.2 (w) × 1.7 (h) × 5.5 (d) inches (Approx. 334 × 42.1 × 138.6 mm) Mass Approx. 46.6 oz. (1.32 kg) Supplied accessories Warranty (1) Operating instructions (1) *1 The specifications are the same as those of the computer you are using. For details, refer to the manuals provided with your computer. *2 The DVI-D port is available only on models with the ATI Mobility RadeonTM Graphics Media Accelerator. *3 Use your product only with the AC adapter and power cord supplied with your computer. Design and specifications are subject to change without notice. Notes on use • Use your product only with the AC adapter and power cord supplied with your computer. • To disconnect the unit completely from the main voltage, unplug the AC adapter. • Make sure that the socket outlet is easily accessible. • Do not place the unit in locations that are: - Extremely hot or cold - Dusty or dirty - Very humid - Vibrating - Subject to strong magnetic fields - Sandy - Subject to direct sunlight • Do not apply mechanical shock or drop the unit. • Make sure that nothing metallic comes into contact with the metal parts of the unit. If this happens, a short-circuit may occur and the unit may be damaged. • Do not operate the unit with a damaged cord. • Do not operate the unit if the unit itself has been dropped or damaged. • Always keep the metal contacts clean. • Do not disassemble or convert the unit. • While in use, it is normal for the unit to get warm. • Keep the unit away from TV or AM receivers, because it can disturb TV or AM reception. • USB, i.LINK, PC-card slot, Printer, DVI-D and MONITOR are not supplied with Limited Power Sources if those connectors are provided. • When connecting or disconnecting the unit, handle it carefully. • When transporting the unit, prevent foreign objects from causing a malfunction by using the battery pack, the connector covers and the supplied slot protectors if there is any. • When transporting your computer, be sure to remove the unit first. Moving your computer with the unit installed could cause the unit to fall off, resulting in personal injury, or damage to the unit or your computer. • If there are any dust or dirt particles on the docking station connector, your computer may not be able to detect the docking station when it is connected (even if the particles are invisible to the eye). If the connection seems to be poor, remove the AC power adapter and battery, and wipe off the connector and the area around it on both the computer and the unit. Commercial air dusters are also effective for blowing away residual dust and dirt. Be careful not to damage the connectors while cleaning them. On cleaning Clean the unit with a soft dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish. Français AVERTISSEMENT Afin de réduire les risques d'incendie ou de choc électrique, n'exposez pas cet appareil à la pluie ni à l'humidité. Pour prévenir tout risque d'électrocution, n'ouvrez pas le boîtier. Confiez l'entretien exclusivement au personnel qualifié. • N'utilisez votre produit qu'avec l'adaptateur CA et le cordon d'alimentation fournis avec votre ordinateur. • Pour déconnecter complètement votre ordinateur de la prise de courant, débranchez l'adaptateur CA. • La prise secteur doit être installée à proximité de l'équipement et doit être aisément accessible. Pour les utilisateurs au Canada Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. VAIO est une marque de Sony Corporation. ATI Mobility RadeonMC est une marque de commerce de Advanced Micro Devices, Inc. Avant utilisation Avant d'utiliser la station d'accueil, veuillez lire attentivement ce manuel et conservezle pour toute référence ultérieure. Pour obtenir davantage d'informations sur le raccordement de la station d'accueil, reportez-vous aux manuels fournis avec votre ordinateur. La station d'accueil VGP-PRSR1 de Sony est conçue pour les ordinateurs personnels Sony. Il se peut toutefois qu'elle ne puisse pas être utilisée avec certains modèles. Spécifications Connecteurs Connecteur de la station d'accueil : Connecteur spécial (1) USB : Connecteur de type A (3) *1 Sortie écran externe : a MONITEUR ( ) : RVB analogique (mini D-Sub à 15 broches) (1) DVI-D ( ) : Numérique (type DVI-D) (1)*2 Connecteur LAN : LAN (10BASE-T/100BASE-TX/1000BASE-T) (1)*1 Puissance requise (Adaptateur CA *3) Entrée: 100 - 240 V CA, 1,5 A, 50/60 Hz (Câble d'alimentation fourni avec votre ordinateur.) Sortie: 19,5 V CC, 4,7 A Température de fonctionnement 5°C à 35°C (41°F à 95°F) (gradient de température inférieur à 10°C (18°F)/heure) Humidité de fonctionnement 20% à 80% (sans condensation), à condition que le taux d'humidité soit inférieur à 65% pour une température de 35°C (95°F) (lecture hygrométrique à moins de 29°C (84°F)) Température de rangement -20°C à +60°C (-4°F à +140°F) (gradient de température inférieur à 10°C (18°F)/heure) Humidité de rangement 10% à 90% (sans condensation), à condition que le taux d'humidité soit inférieur à 20% pour une température de 60°C (140°F) (lecture hygrométrique à moins 35°C (95°F)) Dimensions Env. 334 (l) × 42,1 (h) × 138,6 (p) mm (Env. 13,2 × 1,7 × 5,5 pouces) Poids Env. 1,32 kg (46,6 oz) Accessoires fournis Garantie (1) Mode d'emploi (1) *1 Les spécifications sont les mêmes que celles de l'ordinateur que vous utilisez. Pour plus de détails, reportez-vous aux manuels fournis avec votre ordinateur. *2 Le port DVI-D est disponible uniquement sur les modèles offrant l'accélérateur graphique ATI Mobility RadeonTM Graphics Media Accelerator. *3 N'utilisez votre produit qu'avec l'adaptateur CA et le cordon d'alimentation fournis avec votre ordinateur. La conception et les spécifications sont sujettes à modifications sans préavis. Remarques sur l'utilisation • N'utilisez votre produit qu'avec l'adaptateur CA et le cordon d'alimentation fournis avec votre ordinateur. • Pour déconnecter complètement l'appareil de la prise de courant, débranchez l'adaptateur CA. • Assurez-vous que la prise de courant soit facilement accessible. • Ne placez pas l'appareil dans des endroits : - extrêmement chauds ou froids ; - poussiéreux ou sales ; - très humides ; - soumis à des vibrations ; - soumis à de puissants champs magnétiques ; - sablonneux ; - exposés au rayonnement direct du soleil. • Ne soumettez pas l'appareil à des chocs mécaniques et ne le laissez pas tomber. • Veillez à ce qu'aucun objet métallique n'entre en contact avec les parties métalliques de cet appareil. Si cela se produit, un court-circuit risque de survenir et d'endommager l'appareil. • Ne faites pas fonctionner l'appareil avec un câble endommagé. • Ne faites pas fonctionner l'appareil s'il est tombé ou a subi des dommages. • Veillez à ce que les contacts métalliques restent toujours propres. • Ne démontez pas et ne transformez pas l'appareil. • Le système chauffe en cours d'utilisation. Ceci n'a rien d'anormal. • Gardez l'appareil à l'écart des téléviseurs et des récepteurs AM car il peut causer des interférences dans la réception télévisée ou radiophonique. • Les connecteurs USB, i.LINK, PC Card, Imprimante, DVI-D et MONITOR ne sont pas offerts avec Limited Power Sources, si ces connecteurs sont fournis. • Lors du branchement ou du débranchement de l'appareil, manipulez-le avec soin. • Lorsque vous transportez l'appareil, empêchez des corps étrangers de provoquer un dysfonctionnement en utilisant la batterie, les caches des connecteurs et les protecteurs de fente fournis, le cas échéant. • Lorsque vous transportez votre ordinateur, veillez à retirer l'appareil au préalable. Si vous déplacez votre ordinateur et que l'appareil est installé, l'appareil risque de tomber. Ceci peut entraîner des blessures ou endommager l'appareil ou votre ordinateur. • S'il y a de la poussière ou des particules de saleté sur le connecteur de la station d'accueil, votre ordinateur risque de ne pas pouvoir détecter la station d'accueil lorsqu'elle est raccordée (même si les particules sont invisibles à l'œil nu). Si vous pensez que le raccordement est mauvais, retirez l'Adaptateur CA et la batterie, puis nettoyez le connecteur ainsi que la zone environnante de l'ordinateur et de l'appareil. Les souffleurs disponibles dans le commerce sont également efficaces pour faire partir les résidus de poussière et de saleté. Prenez garde de ne pas endommager les connecteurs lors de leur nettoyage. Entretien Nettoyez l'appareil au moyen d'un chiffon sec et doux, ou légèrement imprégné d'une solution détergente neutre. N'utilisez aucun type de solvant, comme de l'alcool ou de l'essence, qui risquerait de ternir le fini de l'appareil.