Sony VRDMC10 Operating Instructions - Page 33
DV (i.LINK) cable, Preparations for Recording - power cord
UPC - 027242735675
View all Sony VRDMC10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Preparations for Recording DV (i.LINK) cable 1 Turn on the camera. b Note • For the camera, make sure that the AC adapter is connected to the AC power cord. 2 Set the camera to playback mode. • Playback operation differs among camcorders. For most camcorders, switch the power/mode button to playback, PLAY/EDIT or VTR mode to play video or perform recording. For details, refer to the operating instructions of your camcorder. • When you copy HD (High Definition) videos using High Definition Handycam® (HDV) by connecting with DV (i.LINK) cable, set the [i.LINK CONV] setting on the Handycam® to [ON]. This will down-convert videos recorded in HD (High Definition) to SD (Standard Definition) quality. 3 Connect the camera to the DVDirect. DV connector DV IN connector DV (i.LINK) cable (not supplied) b Notes • A DV (i.LINK) cable is for DV output from DV digital video camera only. You cannot record videos from MICROMV or HDV camcorders (HDV format) and other digital video devices having an i.LINK connector. You need an audio/ video cable (AV cable) for these devices. • The following models are not supported for recording with a DV (i.LINK) cable. Use an audio/video cable. - DCR-VX700 - DCR-VX1000 - HDR-FX1 - HDR-FX7 - HDR-FX1000 33