Sony ZS-XN30 Operating Instructions - Page 28

Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION With 3.2-ohm loads, both channels driven from 100 - 10,000 Hz; rated 1.7 W per channelminimum RMS power, with no more than 10 % total harmonic distortion in AC operation. Other Specifications CD player section System Compact disc digital audio system Laser diode properties Material: GaAlAs Wave length: 780 nm Emission duration: Continuous Laser output: Less than 44.6 µW (This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.) Spindle speed 400 r/min (rpm) to 1 000 r/min (rpm) (CLV) Number of channels 2 Frequency response 20 - 20 000 Hz +0/-1 dB Wow and flutter Below measurable limit Radio section Frequency range FM: 87.5 - 108 MHz AM: 530 - 1 710 kHz Antennas FM: Telescopic antenna AM: Built-in ferrite bar antenna General Speaker Full range: 8 cm (3 1⁄4 in.) dia., 3.2 Ω, cone type (2) Passive radiator: 8 cm (3 1⁄4 in.) dia. (2) Output Headphones jack (stereo minijack): For 16 - 64 Ω impedance headphones Power output 2.3 W + 2.3 W (at 3.2 Ω, 10 % harmonic distortion) Power requirements DC IN 9V jack accepts: Supplied AC power adaptor for use with 120 V AC, 60 Hz 9 V DC, 6 size C (R14) batteries Battery life CD playback Sony R14P: approx. 2 h Sony alkaline LR14: approx. 8 h Radio reception Sony R14P: approx. 23 h Sony alkaline LR14: approx. 45 h Dimensions Approx. 511 × 154 × 244 mm (w/h/d) (20 1⁄8 × 6 1⁄8 × 9 5⁄8 inches) (incl. projecting parts) Mass Approx. 3.2 kg (7 lb. 1 oz) (incl. batteries) Supplied accessories AC power adaptor (1) CD-ROM (SonicStage) (1) SonicStage Installation/Operating Guide (1) US and foreign patents licensed from Dolby Laboratories. Design and specifications are subject to change without notice. Optional accessories Sony MDR headphones series 28