Sub-Zero ID-24R Integrated Design Guide - Page 8

Custom Panels

Get Sub-Zero ID-24R PDF manuals and user guides View all Sub-Zero ID-24R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

INTEGRATED REFRIGERATION Custom Panels For integrated models, custom door panels and handle hardware must be provided. Refer to the panel requirements chart and typical panel dimensions. The thickness of the custom panel can vary. A minimum 5/8" (16) thick panel is required, but the thickness can be increased provided it does not exceed the weight limit. The depth of each integrated model is 24" (610). Allow for panel thickness when planning the finished opening depth. Refer to the full-scale template on page 11. CAUTION As reveals between cabinetry and the unit decrease, severe finger pinching can occur while door is closing. Finish all sides of custom panels. They will be visible when the door/drawer is open. D-style handles are recommended. Door handles must be located near the edge of the panel opposite the hinge and should be centered top to bottom. Drawer handles must be located near the top edge of each panel. Stainless steel tubular and pro handles are avail­able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. PANEL REQUIREMENTS PANEL WEIGHT 18" Column 24" Column 30" Column 36" Column PANEL WEIGHT 30" Tall (door) 36" Tall (door) Drawer PANEL THICKNESS All Panels MAX 45 lb (20 kg) 60 lb (27 kg) 75 lb (34 kg) 75 lb (34 kg) MAX 50 lb (22 kg) 60 lb (27 kg) 15 lb (7 kg) MIN 5/8" (16) TYPICAL PANEL DIMENSIONS 797/8" (2029) 493/8" (1254) W Column W Tall 13 9/16" (345) 1611/16" (424) W Drawer Typical panel dimensions are based on an 84" (2134) finished height for column and tall models and 341/2" (876) for drawer models, with a 4" (102) toe kick and 1/8" (3) reveals. Panel dimensions must be adjusted accordingly for all other installations. Refer to the illustration for panel heights and the chart below for panel widths. PANEL WIDTH MODEL 18" Model 24" Model 27" Model 30" Model 36" Model W 173/4" (451) 233/4" (603) 263/4" (679) 293/4" (756) 353/4" (908) DUAL INSTALLATION For dual installations, refer to the illustration for panel heights and the chart below for panel widths. PANEL WIDTH MODEL 18" Model 24" Model 27" Model 30" Model 36" Model W 1713/16" (452) 2313/16" (605) 2613/16" (681) 2913/16" (757) 3513/16" (910) 8 | Sub-Zero Customer Care 800.222.7820

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
8
|
Sub-Zero Customer Care 800.222.7820
INTEGRATED REFRIGERATION
Custom Panels
For integrated models, custom door panels and handle
hardware must be provided. Refer to the panel requirements
chart and typical panel dimensions.
The thickness of the custom panel can vary. A minimum
5
/
8
"
(16)
thick panel is required, but the thickness can be
increased provided it does not exceed the weight limit. The
depth of each integrated model is 24"
(610)
. Allow for panel
thickness when planning the finished opening depth. Refer
to the full-scale template on page 11.
CAUTION
As reveals between cabinetry and the unit decrease,
severe finger pinching can occur while door is closing.
Finish all sides of custom panels. They will be visible when
the door/drawer is open.
D-style handles are recommended. Door handles must be
located near the edge of the panel opposite the hinge and
should be centered top to bottom. Drawer handles must
be located near the top edge of each panel. Stainless steel
tubular and pro handles are available through an authorized
Sub-Zero dealer. For local dealer information, visit the find a
showroom section of our website, subzero.com.
PANEL REQUIREMENTS
PANEL WEIGHT
MAX
18" Column
45 lb
(20 kg)
24" Column
60 lb
(27 kg)
30" Column
75 lb
(34 kg)
36" Column
75 lb
(34 kg)
PANEL WEIGHT
MAX
30" Tall (door)
50 lb
(22 kg)
36" Tall (door)
60 lb
(27 kg)
Drawer
15 lb
(7 kg)
PANEL THICKNESS
MIN
All Panels
5
/
8
"
(16)
TYPICAL PANEL DIMENSIONS
Typical panel dimensions are based on an 84"
(2134)
finished
height for column and tall models and 34
1
/
2
"
(876)
for drawer
models, with a 4"
(102)
toe kick and
1
/
8
"
(3)
reveals. Panel
dimensions must be adjusted accordingly for all other instal-
lations. Refer to the illustration for panel heights and the
chart below for panel widths.
PANEL WIDTH
MODEL
W
18" Model
17
3
/
4
"
(451)
24" Model
23
3
/
4
"
(603)
27" Model
26
3
/
4
"
(679)
30" Model
29
3
/
4
"
(756)
36" Model
35
3
/
4
"
(908)
DUAL INSTALLATION
For dual installations, refer to the illustration for panel
heights and the chart below for panel widths.
PANEL WIDTH
MODEL
W
18" Model
17
13
/
16
"
(452)
24" Model
23
13
/
16
"
(605)
27" Model
26
13
/
16
"
(681)
30" Model
29
13
/
16
"
(757)
36" Model
35
13
/
16
"
(910)
W
49
3
/
8
"
(1254)
13
9
/
16
"
(345)
16
11
/
16
"
(424)
W
W
79
7
/
8
"
(2029)
Column
Tall
Drawer