Symphonic WF15L5 Owner's Manual - Page 2

PREPARATION FOR USE CONNECTIONS Plug the incoming cable into the ANT. jack on the rear of the TV. Cable TV signal OR Antenna Rear of this TV INSTALLING THE BATTERIES 1 2 3 Install two AAA batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. Incoming cable from home Antenna / Cable Company (No Cable Box) R AUDIO L VIDEO1 VIDEO S-VIDEO Cable Box or ANT OR Satellite Box* HEAD PHONE OUT IN Incoming cable from Cable Company or Satellite Antenna ANT *NOTE (DO NOT DISCONNECT FROM BOX) Some cable TV systems use scrambled signals and require a special converter to receive these channels. Consult your local cable company. You can bracket this product as wall mounting TV using the arm adapted for 100mm (commercially available). CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. Note: • For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT jack before moving the unit. [EXTERNAL CONNECTION] VIDEO1 input Rear of this TV (OUT) (IN) R ex. Audio Cable (IN) AUDIO L VI D EO1 VIDEO (OUT) (IN) S-VIDEO R AUDIO L VIDEO1 VIDEO S-VIDEO ANT HEAD PHONE Video Cassette Recorder Video Cable (OUT) OR S-Video Cable ANT HEAD PHONE [BATTERY PRECAUTIONS] • Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. • Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones. • If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. • Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. PHOTO STAND Photo Stand Adjust the length of the stand in 5 levels to change the angle of the TV. OPERATIONS REMOTE CONTROL AND FRONT PANEL FUNCTION POWER button To turn TV on/off VOL(UME) X/Y buttons To adjust volume INPUT SELECT POWER o CH m p VOL n INPUT SELECT button To select TV or external input CH(ANNEL) K/L buttons 1 2 3 4 5 6 7 8 9 Channel number buttons To select channels MENU button To view on-screen menu MUTE button To mute sound DISPLAY button To display CH No./Audio Status MENU 0 +100 MUTE SLEEP CH RET DISPLAY SLEEP button CH(ANNEL) RET(URN) button To return to previous channel Notes: ● The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment. ● The S-VIDEO jack is given priority over the VIDEO jack. SELECTING AUDIO/VIDEO INPUT When you use the AUDIO/VIDEO input jacks, select "VIDEO1" mode by hitting [INPUT SELECT] on the remote control. The input mode changes by hitting the button as following: INPUT SELECT TV channel VIDEO1 MENU Y VOLUME X L CHANNEL K SELECT POWER MENU Y VOLUME X L CHANNEL K SELECT POWER POWER button To turn TV on/off SELECT button CHANNEL K/L buttons To select channels VOLUME X/Y buttons To adjust volume MENU button To view on-screen menu Infrared Sensor Window Note: ● If some digits appear in the corner of the screen when the unit is turned on for the first time, hit [POWER] without unplugging the power cord.