TEAC AG-H380 Owners Manual - Page 20

Programmed Playback (USB) (2) To check the programmed order To clear the programme 1. In the stop mode, press the PROGRAM button. In the stop mode, press the PROGRAM button repeatedly. The song number and programme number will be shown on the display. To add a file to the programme 2. Hold down the CLEAR button for more than 4 seconds. < If one of the following buttons is pressed, the programmed contents will also be cleared: SOURCE (TUNER, CD, AUX1/2, PHONO), POWER < If the unit is disconnected from the power supply, the programmed contents will be cleared. In the stop mode, press the PROGRAM button repeatedly until the programme number you want to insert a file appears on the display. If you want to add a file to the end of the programme, press the PROGRAM button repeatedly until "P-END" briefly appears on the display. Then select a file using the ˙ or ¥ button. The file is added to the programme. To delete a file from the programme In the stop mode, press the PROGRAM button repeatedly until the programme number to be deleted appears on the display, then press the CLEAR button. The selected file is deleted from the programme. 20