TEAC AG790 AG-790A Manual - Page 10
Bass Control - receiver
View all TEAC AG790 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
ENGLISH D Bass Control This control is used for adjusting the level of the low frequency sound range. AB C DE F A Selecting the speakers Press the SPEAKERS button (A or B) to turn the speakers on or off. When ON is selected, the SPEAKERS indicator lights. 1. Press the BASS button. "BAS" appears on the display. 2. Within 3 seconds, turn the JOG dial to adjust the level. The level can be adjusted in 2 steps from -10 to +10. Caution: If the speakers are connected to the SPEAKERS A terminals, turn the SPEAKER A on using the SPEAKERS A button. If no speakers are connected to the SPEAKER B terminal, be sure to turn off the SPEAKER B button, or no sound will be output from SPEAKER A, and vice versa. E Treble Control This control is used for adjusting the level of the high frequency sound range. B Listening through headphones For private listening, first reduce the volume level on the receiver to minimum. Then insert the plug from your headphones into the PHONES jack, and adjust the volume by turning the VOLUME knob. If you want to cut off the sound from speakers, press the SPEAKERS button to turn it off. CAUTION Always lower the volume level prior to plugging in your headphones. TO AVOID DAMAGING YOUR HEARING - Do not place your headphones on your head until after you have plugged them in. 1. Press the TREBLE button. "TRE" appears on the display. 2. Within 3 seconds, turn the JOG dial to adjust the level. The level can be adjusted in 2 steps from -10 to +10. F How to adjust the balance between the left and right speakers C LOUDNESS button This button compensate for the loss of bass at low volumes. Set this button to the OFF position when listening at normal levels. 1. Press the BALANCE button. "BAL" appears on the display. 2. Within 3 seconds, turn the JOG dial to adjust the level. The level can be adjusted from L+16 to R+16: L+16 ... L+1 a CENT q R+1 ... R+16 Normally, select "CENT (center)". 11