TEAC AI-101DA Owner's Manual (English, Français, Español) - - Page 16
Automatic power saving (APS) function, When automatic power saving APS is off
View all TEAC AI-101DA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Automatic power saving (APS) function This unit has an automatic power saving function. The operation of this function depends on the automatic power saving (APS) setting and the selected input source. When automatic power saving (APS) is on If there is no signal from the selected input source and no operation has occurred for about 30 minutes, the unit will enter standby mode.* oo Operation of the main unit or the remote control will end standby mode. oo If the automatic power saving function is on, the unit will not enter sleep mode. *Power consumption in standby mode is 0.5 W or less. When automatic power saving (APS) is off If the input source is USB or OPTICAL If there is no signal from the selected input source and no operation has occurred for about 3 minutes, the unit will enter sleep mode. oo Input of a signal or operation of the main unit or the remote control will end sleep mode (auto- matic on from standby function). If the input source is Bluetooth or LINE The unit will not enter sleep mode. Checking the automatic power saving (APS) function setting When automatic power saving is on When the unit is turned on, the power indicator and the indicator for the selected source will blink for a little while. When automatic power saving is off When the unit is turned on, the power indicator and all the input source indicators will blink for a little while and then the indicator for the selected source will light. Setting the automatic power saving function When the unit is on, press and hold the remote control setting button, and then press the standby/ on (¤) button. All the input indicators will light or turn off for about five seconds. No indicators lit: APS on All indicators lit: APS off 16