TEAC DM-3200 DM-3200 with Pro Tools

TEAC DM-3200 Manual

Get TEAC DM-3200 PDF manuals and user guides View all TEAC DM-3200 manuals
Add to My Manuals
Save this manual to your list of manuals

TEAC DM-3200 manual content summary:

  • TEAC DM-3200 | DM-3200 with Pro Tools - Page 1
    DM-3200 DAW Control HUI emulation for Pro Tools Version 1.11 DM-3200 Pro Tools DM-3200 Pro Tools 1/8
  • TEAC DM-3200 | DM-3200 with Pro Tools - Page 2
    DM-3200 Pro Tools 1. Summary ...3 1.1 Setting up the DM-3200 ...3 1.2 Setting up Pro Tools ...3 2. LCD Screen...4 2.1 Switching between Ch1-8 and 9-16 screens 4 3. Channel strips...5 3.1 Encoder ...5 3.2 Ring LED 15-dot display ...5 3.3 Rec function ...6 3.4 Solo and Mute keys...6 3.5 Fader touch,
  • TEAC DM-3200 | DM-3200 with Pro Tools - Page 3
    the DM-3200's REMOTE > EXT.CTRL screen, add two "HUI Emulate" devices. Similarly, add one "HUI Emulate" device in the REMOTE > MACHINE. CTRL screen. It is necessary to check the TRA radio button here in order to control the transport functions of Pro Tools. 1.2 Setting up Pro Tools From the Setups
  • TEAC DM-3200 | DM-3200 with Pro Tools - Page 4
    this: DM-3200 Pro Tools 2.1 Switching between Ch1-8 and 9-16 screens The HUI emulate screen is switched on a 8-channel basis. Switching between the channels 1-8 and 9-16 are made as follows: - Switching at the REMOTE screen Select the target channel's HUI emulate screen using CONTROL under
  • TEAC DM-3200 | DM-3200 with Pro Tools - Page 5
    no Master module in the HUI protocol. 3.1 Encoders Target control parameters are selected using Top panel Encoder mode. By operating the encoder on the mixer, target parameters of Pro Tools can be controlled. Also, information on the target channels is displayed on the LCD screen. Target parameters
  • TEAC DM-3200 | DM-3200 with Pro Tools - Page 6
    -3200 Pro Tools 3.3 Rec function This is controlled by holding the REC key while pressing the SEL key on/off on an individual module. The LEDs turn on or off depending on messages sent by Pro Tools. 3.4 Solo and Mute keys These are controlled by switching the keys on/off on the individual channels
  • TEAC DM-3200 | DM-3200 with Pro Tools - Page 7
    DM-3200 Pro Tools 4.1 LCD Control target parameters are displayed in the Select assign section. The name of each channel, information on grouping, Input/Output sources, etc, are displayed in the Channel Name section. Those displays depend on the response from DAW. The corresponding key assignments
  • TEAC DM-3200 | DM-3200 with Pro Tools - Page 8
    DM-3200 Pro Tools 5. Transport Control target parameters are as follows: DM-3200 Transport keys Pro Tools function Transport Shift + Record < Bank, Bank > Quick Punch < Bank, Bank > Shift + > < Nudge, Nudge > +, - > F7 RHSL In Shift + In Out
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
DM-3200 Pro Tools
DM-3200 DAW Control
HUI emulation for Pro Tools
Version 1.11
DM-3200 Pro Tools
1/8