TEAC DM-3200 DM-3200 with Pro Tools - Page 5
Channel strips - pro tools 9
View all TEAC DM-3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
DM-3200 Pro Tools 3. Channel strips The control target parameters as follows: DM-3200 Ring Encoder Ring LED Pro Tools function Encoder Ring LED Rec function LED Solo Mute Track fader touch Track fader Master fader touch Master fader Rec/Ready LED Solo Mute Fader touch Fader move ----- Note Controls operations such as Pan and Aux Send Turns on the LED according to data sent by Pro Tools in response to Ring encoder operation. Displays each track's record status Switches Solo on and off for each track. Switches Mute on and off for each track. Sends fader touch message to Pro Tools Performs Fader control. N/A as there is no Master module in the HUI.protocol N/A as there is no Master module in the HUI protocol. 3.1 Encoders Target control parameters are selected using Top panel Encoder mode. By operating the encoder on the mixer, target parameters of Pro Tools can be controlled. Also, information on the target channels is displayed on the LCD screen. Target parameters, etc displayed Target channels, etc. displayed Information displayed here comes in messages sent by Pro Tools. 3.2 Ring LED 15-dot display While the Ring LED of the DM-3200 is made up of an array of 15 dots, HUI uses a 12-dot system. Relationships between the two are as shown below: HUI V pot LED DM-3200 Ring LED HUI V pot LED DM-3200 Ring LED Information displayed here comes in messages sent by Pro Tools. DM-3200 Pro Tools 5/8