TEAC DM-4800 DM-3200 with Digital Performer - Page 5

DM-3200 DP 4. Channel Strip The table below provides an overview of the channel strip-related DP-ready functions. DM-3200 Ring encoder Ring LED Select Select Solo Mute Track fader touch Track fader Master fader touch Master fader Modifier Rec DP function Encoder Ring LED Select Rec ready Solo Mute Track fader touch Track fader Master fader touch Master fader Note Controls operations such as Pan and Aux Send. Turns on the LED according to data sent by DP in response to Ring encoder operation. Selects tracks. The SELECT LED turns on for the selected tracks. Arms tracks (making them ready for recording). The REC LED turns on for the armed tracks. Switches the track solo on and off. The SOLO LED turns on when a track is soloed. Switches the track mute on and off. The MUTE LED turns on when a track is muted. Sends out a touch-sense Track fader message. Controls the Track fader. Sends out a touch-sense Master track message. Controls the Master fader. 5. Top panel buttons The table below provides an overview of the top panel button-related DP- ready functions. DM-3200 Pan Sends Flip Arrow up Arrow down Arrow left Arrow right Data wheel Modifier DP function Pan Sends Flip Arrow up Arrow down Arrow left Arrow right Scrub Scrub Note Sets parameter to be controlled by the Ring encoder to Pan. Sets parameter to be controlled by the Ring encoder to Send. Flips between a parameter value assigned to a track's Ring encoder and a fader level. Shifts the data wheel to the Scrub mode. 5.1 Selection of Send 1-4 Pressing the Encoder mode Sends key makes the Send 1-4 feature available for use. Sends 1-4 are selected with the arrow up/down key. DM-3200 DP 5/6