TEAC DM-4800 DM-3200 with Pro Tools

TEAC DM-4800 Manual

Get TEAC DM-4800 PDF manuals and user guides View all TEAC DM-4800 manuals
Add to My Manuals
Save this manual to your list of manuals

TEAC DM-4800 manual content summary:

  • TEAC DM-4800 | DM-3200 with Pro Tools - Page 1
    DM-3200 DAW Control HUI emulation for Pro Tools Version 1.11 DM-3200 Pro Tools DM-3200 Pro Tools 1/8
  • TEAC DM-4800 | DM-3200 with Pro Tools - Page 2
    DM-3200 Pro Tools 1. Summary ...3 1.1 Setting up the DM-3200 ...3 1.2 Setting up Pro Tools ...3 2. LCD Screen...4 2.1 Switching between Ch1-8 and 9-16 screens 4 3. Channel strips...5 3.1 Encoder ...5 3.2 Ring LED 15-dot display ...5 3.3 Rec function ...6 3.4 Solo and Mute keys...6 3.5 Fader touch,
  • TEAC DM-4800 | DM-3200 with Pro Tools - Page 3
    DM-3200 Pro Tools 1. Summary This manual describes how to operate the DM-3200's HUI emulation with Pro Tools (Pro Tools 6.9.2 tested). 1.1 Setting up the DM-3200 At the DM-3200's REMOTE > EXT.CTRL screen, add two "HUI Emulate" devices. Similarly, add one "HUI Emulate" device in the REMOTE > MACHINE.
  • TEAC DM-4800 | DM-3200 with Pro Tools - Page 4
    this: DM-3200 Pro Tools 2.1 Switching between Ch1-8 and 9-16 screens The HUI emulate screen is switched on a 8-channel basis. Switching between the channels 1-8 and 9-16 are made as follows: - Switching at the REMOTE screen Select the target channel's HUI emulate screen using CONTROL under
  • TEAC DM-4800 | DM-3200 with Pro Tools - Page 5
    in the HUI protocol. 3.1 Encoders Target control parameters are selected using Top panel Encoder mode. By operating the encoder on the mixer, target parameters of Pro Tools can be controlled. Also, information on the target channels is displayed on the LCD screen. Target parameters, etc displayed
  • TEAC DM-4800 | DM-3200 with Pro Tools - Page 6
    module. The LEDs turn on or off depending on messages sent by Pro Tools. 3.4 Solo and Mute keys These are controlled by switching the keys on/off on the individual channels. The LEDs turn on or off depending on messages sent by Pro Tools. 3.5 Fader touch, Fader Touching the fader on the individual
  • TEAC DM-4800 | DM-3200 with Pro Tools - Page 7
    Select assign section. The name of each channel, information on grouping, Input/Output sources, etc, are displayed in the Channel Name section. Those displays depend on the response from DAW. The corresponding key assignments are also displayed as a guide and are not operative. DM-3200 Pro Tools 7/8
  • TEAC DM-4800 | DM-3200 with Pro Tools - Page 8
    5. Transport Control target parameters are as follows: DM-3200 Transport keys Pro Tools function Transport Shift + Record < Bank, Bank > Quick Punch < Bank, Bank > Shift + > < Nudge, Nudge > +, - > F7 RHSL In Shift + In Out Shift + Out Repeat
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
DM-3200 Pro Tools
DM-3200 DAW Control
HUI emulation for Pro Tools
Version 1.11
DM-3200 Pro Tools
1/8