TEAC DM-4800 DM-3200 with Pro Tools - Page 6
Top panel Buttons - mixer
View all TEAC DM-4800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
DM-3200 Pro Tools 3.3 Rec function This is controlled by holding the REC key while pressing the SEL key on/off on an individual module. The LEDs turn on or off depending on messages sent by Pro Tools. 3.4 Solo and Mute keys These are controlled by switching the keys on/off on the individual channels. The LEDs turn on or off depending on messages sent by Pro Tools. 3.5 Fader touch, Fader Touching the fader on the individual channels sends touch information to DAW. Also, moving the faders control the DAW track faders. HUI does not respond to the master fader touch and move since it has no master fader. 3.5.1 Stereo fader operation Selecting Remote Layer the stereo fader on the mixer moves down to the minimum position. When Remote Layer is selected and the stereo fader is operated, the fader itself moves but does not control any parameters or audio. 4. Top panel Buttons Control target parameters are as follows: Category Encoder mode Global DM-3200 Flip Pan Send A-E Shift Pro Tools function Flip Pan Send A-E Shift/Add CTRL CTRL/Clutch Around LCD LCD Arrow up Arrow down Arrow Left Arrow right Jog/Shuttle Shift Jog/Shuttle Data wheel - Up Down Left Right Scrub + Shuttle Data wheel Display Note Exchanges the control targets of the faders and encoders. Switches the encoder control targets to PAN. Switches the encoder targets to Send A-E. Acts as an auxiliary key to be used in combination with other keys. Acts as an auxiliary key to be used in combination with other keys. Acts as a HUI upward arrow key. Acts as a HUI downward arrow key. Acts as a HUI leftward arrow key. Acts as a HUI rightward arrow key. Switches the HUI scrub mode on/off. Switches the HUI shuttle mode on/off. Acts as a HUI data wheel. Displays character data received from HUI. DM-3200 Pro Tools 6/8