TEAC DP-24 DP-24 V1.02 Release Notes - Page 1

DP-24 Release Notes Notice Always use the most recent firmware for this device. Please visit the TASCAM web site (http://tascam.com) to check for the latest firmware. Maintenance items V1.02 changes •• Some WAV format files were not recognized. This has been fixed. •• When MMC mode was set to SLAVE, MMC REC commands were not always received. This has been fixed. •• When the MIDI GENERATOR was set to MTC, synchronization was sometimes lost. The stability of MTC GENERATOR output has been improved. •• Playback could become unstable after recording a 24- bit, 44.1kHz song using punch-in and punch-out. This has been fixed. •• When using CD Writer to change song order, sometimes canceling a change would not be reflected correctly in the track order. This has been fixed. •• The REMAIN indicator shown in Mixdown and Mastering modes is now calculated for recording stereo WAV Files. •• Waveforms were not always displayed correctly when zoomed in or out. This has been fixed. •• Values shown in the EQ pop-up were sometimes incorrect. This has been fixed. •• On the MIXER screen, more effects could be added then are supported by the unit. This has been fixed. •• In addition, other improvements to operation stability have been made. Checking the firmware version Check the firmware version of your DP-24 before conducting a firmware update. 1. Turn the unit's power ON. 2. Press the MENU button to open the MENU screen. 3. Use the JOG/DATA dial or CURSOR (5/b/g/ t) buttons to select the INFORMATION menu (selected item appears green), and press the F4 (t) button to open the INFORMATION screen. You do not need to update the unit's firmware if the SYSTEM VERSION shown here is the same as or newer than the version that you intend to use for the update. D01174200B TASCAM DP-24 1