TEAC GR-7I-W Owners Manual - Page 25
Troubleshooting
View all TEAC GR-7I-W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Troubleshooting ENGLISH If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center. General No power e Check the connection to the AC power supply. Check and make sure the AC source is not a switched outlet and that, if it is, the switch is turned on. Make sure there is power to the AC outlet by plugging another item such as a lamp or fan into the outlet. No sound from speakers. eSelect the source by pressing the iPod/shuffle, AUX or TUNER (FM/AM) button. e Adjust the volume. e Pull out the headphone's plug from the PHONES jack. e Check if the sound is muted. If that is the case, press the MUTING button again. iPod Player Cannot insert the iPod. e Check the dock adapter. e Remove dust or obstacles from the Dock connector of the GR-7i and the iPod, and insert the iPod again. Will not play. e Remove the iPod from the dock, wait a few seconds, and insert it again. eSoftware update may solve the problem. Visit the Apple website and download the latest iPod Software. Cannot operate the iPod. e Set the HOLD switch of the iPod to off. Tuner Cannot listen to any station, or signal is too weak. e Tune in the station properly. e Rotate the FM or the AM antenna until you get stations clearly. The sound is noisy. e The unit is too close to a TV or similar appliances. Install the unit apart from them, or turn them off. If normal operation cannot be resumed, unplug the power cord from the outlet and plug it again. Remote control doesn't work. e Press the STANDBY/ON button to turn the unit on. e If the battery is exhausted, replace it with a new one. e Use remote control unit within the range (5 m) and point at the remote sensor on the front panel. e Clear obstacles between the remote control unit and the main unit. e If a strong light is near the unit, turn it off. Maintenance If the surface of the unit gets dirty, wipe with a soft cloth or use a diluted mild liquid soap. Be sure to remove any excess liquid completely. Do not use thinner, benzine or alcohol as they may damage the surface of the unit. Allow the surface of the unit to dry completely before using. 25