TEAC SR-L280IB SR-L280i Manual - Page 4
OWNER’S MANUAL, Contents, Before Using the Unit, DO NOT MOVE THE UNIT DURING PLAYBACK
View all TEAC SR-L280IB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Contents Before Using the Unit Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Before Using the Unit 5 Discs 6 Emergency Switch 7 Connections 8 Unit Functions 10 Display 12 Getting Started 13 Remote Control Unit 14 Setting the Clock 15 Basic Operation 16 Listening to CD/MP3/WMA (disc 18 Listening to MP3/WMA (USB 19 Listening to CD/MP3/WMA (disc/USB 20 Programmed Playback 22 Repeat/Shuffle Playback 24 Listening to iPod 25 Operating iPod 26 Listening to an External Source 27 Listening to the Radio 28 Preset Tuning 29 RDS 30 RDS (PTY Search 31 Timer 32 Specifications 34 Troubleshooting 35 Read this before attempting any operations. < As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. < The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician. < Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, heat, cold or moisture. < Do not place the unit on an amplifier/receiver. < Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the unit, contact your dealer or service company. < When removing the power plug from the wall outlet, always pull directly on the plug, never yank the cord. < Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth. < Keep this manual in a safe place for future reference. DO NOT MOVE THE UNIT DURING PLAYBACK During playback, the disc rotates at high speed. Do NOT lift or move the unit during playback. Doing so may damage the disc. WHEN MOVING THIS UNIT When changing places of installation or packing the unit for moving, be sure to remove the disc and return the disc table to its original position in the player. Then, press the power switch to turn the power off, and disconnect the power cord. Moving this unit with the disc loaded may result in damage to this unit. 4