TEAC TA-1VP TA-1VP owners manual - Page 18
Rear panel
View all TEAC TA-1VP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
4 - Names and Functions of Parts Rear panel # MAIN Line Output The TA-1VP's main audio output. It accepts a 1/4-inch TRS (tip-ring-sleeve) phone plug. $ DOUBLE TRACK Line Output If you have selected stereo double tracking, the second track is available at this output. It accepts a 1/4-inch TRS (tip-ring- sleeve) phone plug. % LINE IN Accepts a balanced line level signal on a 1/4-inch TRS (tip-ring-sleeve) phone plug. Unbalanced sources can also be connected, but they will be quieter, so extra input level adjustment will be required. NOTE This input is NOT a microphone input. A line level signal is required. Connect Microphones to the front panel MIC IN jack. ^ MIDI OUT Connect to the MIDI Input of a MIDI sequencer to dump. Preset and Setup Data via MIDI SysEx. & MIDI IN If you will be controlling your TA-1VP via MIDI, connect the MIDI Out from a MIDI sequencer, keyboard, or other MIDI source here. Connect the MIDI Out from a sequencer to load previously saved SysEx data files. * DIGITAL OUT This RCA jack outputs a S/PDIF digital signal with the main output on Left, Double Track output on Right. The Sampling Frequency is 44.1 kHz fixed. ( FOOT SWITCH Plug in a footswitch here. A 1/4-inch TS (tipsleeve) plug is required. There are two varieties of footswitches: those that are shorted by default and those that are open by default. You should plug in your footswitch and then power on the TA-1VP. The TA‑1VP will detect which kind of footswitch you have and behave accordingly. The actual function of the footswitch is selected in the Setup Menu. ) Cord hook Use the hook (cord holder) to secure the AC adaptor cord. Q DC IN 12V Power Input Plug the connector from the included AC adaptor (TASCAM PS-1225L) in here. Do NOT use an AC adaptor which is not expressly intended for the TA-1VP. 18 TASCAM TA-1VP