TP-Link 10GE T1700G-28TQUN V1 User Guide - Page 95
Configuration Procedure, Operation, Description, 1Q VLAN, VLAN Config, Protocol VLAN, Protocol
View all TP-Link 10GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Configuration Procedure Configure switch A Step Operation 3 Create VLAN10 4 Create VLAN20 Description Required. On VLAN→802.1Q VLAN→VLAN Config page, create a VLAN with its VLAN ID as 10, owning Port 12 and Port 13, and configure the egress rule of Port 12 as Untagged and Port 13 as Tagged. Required. On VLAN→802.1Q VLAN→VLAN Config page, create a VLAN with its VLAN ID as 20, owning Port 11 and Port 12, and configure the egress rule of Port 11 as Tagged Port 12 as Untagged. Configure switch B Step Operation 1 Create VLAN10 2 Create VLAN20 3 Create Protocol Template 4 Create Protocol VLAN 10 5 Create Protocol VLAN 20 Description Required. On VLAN→802.1Q VLAN→VLAN Config page, create a VLAN with its VLAN ID as 10, owning Port 3 and Port 4, and configure the egress rule of Port 3 as Untagged and Port 4 as Tagged. Required. On VLAN→802.1Q VLAN→VLAN Config page, create a VLAN with its VLAN ID as 20, owning Port 3 and Port 5, and configure the egress rule of Port 3 as Untagged and Port 5 as Tagged. Required. On VLAN→Protocol VLAN→Protocol Template page, configure the protocol template practically. E.g. the Ether Type of IP network packets is 0800 and that of AppleTalk network packets is 809B. On VLAN→Protocol VLAN→Protocol Group page, create protocol VLAN 10 with Protocol as IP. Select and enable Port 3, Port 4 and Port 5 for Protocol VLAN feature. On VLAN→Protocol VLAN→Protocol Group page, create protocol VLAN 20 with Protocol as AppleTalk. Select and enable Port 3, Port 4 and Port 5 for Protocol VLAN feature. Return to CONTENTS 85