TP-Link AC1350 Archer C58EU V1 Quick Install Guide
TP-Link AC1350 Manual
 |
View all TP-Link AC1350 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link AC1350 manual content summary:
- TP-Link AC1350 | Archer C58EU V1 Quick Install Guide - Page 1
Guide AC1350 Wireless Dual Band Router 58 Connect the Hardware If your Internet connection is through an Ethernet cable from the wall instead of through a modem, connect the Ethernet cable directly to the router restart. Power adapter 4 Turn on the router. 5 Verify that the hardware connection is - TP-Link AC1350 | Archer C58EU V1 Quick Install Guide - Page 2
go to Basic > Wireless to obtain or reset your wireless password. If your questions are not listed here, please refer to the support page at www.tp-link.com. More Features The TP-LINK router is equipped with various features, such as Guest Network, Parental Controls, Access Control, etc. You can
-
1 -
2
 |
 |
Internet
Quick Installation Guide
AC1350 Wireless Dual Band Router
If your Internet connection is through an Ethernet cable from the wall instead of
through a modem, connect the Ethernet cable directly to the router’s Internet
port, and then follow step 4 and 5 to complete the hardware connection.
Verify that the hardware connection is
correct by checking these LEDs.
5
2.4G
On
5G
On
On
Internet
Power
On
Note: If the 2.4G LED
and 5G LED
are off,
please press the
Wi-Fi
button on the rear
panel for 2 seconds, and then check the LEDs
again in a few seconds.
Connect the Hardware
58
Turn on the router.
4
Connect the modem to the
Internet port on your router with
an Ethernet cable.
Turn off the modem, and remove
the backup battery if it has one.
1
Turn on the modem, and then
wait about
2 minutes
for it to
restart.
3
2
Router
Modem
Power adapter
Power adapter