TP-Link AC1750 Archer C7 V3 Quick Install Guide US
TP-Link AC1750 Manual
 |
View all TP-Link AC1750 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link AC1750 manual content summary:
- TP-Link AC1750 | Archer C7 V3 Quick Install Guide US - Page 1
Quick Installation Guide AC1750 Wireless Dual Band Gigabit Router 7106505288 REV3.0.0 Connect the Hardware If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the Archer C7's Internet port. - TP-Link AC1750 | Archer C7 V3 Quick Install Guide US - Page 2
Archer C7 to its factory default settings and then use the default User Name and Password 'admin' to log in. Q5. What can I do if I forget my wireless network password? A. Log in to the Archer C7's Web Management page, and then go to 'Basic'->'Wireless' to obtain the wireless password. ©2015 TP-LINK
-
1 -
2
 |
 |
Quick Installation Guide
AC1750 Wireless Dual Band Gigabit Router
Connect the Hardware
7106505288
REV3.0.0
Verify that the following LEDs are
on and stable before continuing
with the configuration.
5
Note: If the 2.4G LED and 5G LED are off, please
turn on the Wireless On/Off switch on the rear
panel. And 5 seconds later check the LEDs again.
Power
On
System
Flashing
Internet
On/Flashing
2.4G
Flashing
5G
Flashing
Archer C7
4
Turn on the Archer C7.
Power adapter
Power adapter
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the Archer C7’s Internet port.
Modem
Internet
Turn on the modem, and
then wait
2 minutes
for
it to restart.
Turn off the modem,
and remove the backup
battery if it has one.
1
3
Connect the modem to the
Internet port on your Archer C7
with an Ethernet cable.
2