TP-Link AC1900 Archer C9 V2 Quick Install Guide
TP-Link AC1900 Manual
 |
View all TP-Link AC1900 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link AC1900 manual content summary:
- TP-Link AC1900 | Archer C9 V2 Quick Install Guide - Page 1
Installation Guide AC1900 Wireless Dual Band Gigabit Router 7106505584 REV2.0.0 Connect the Hardware If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the router's Internet port, then - TP-Link AC1900 | Archer C9 V2 Quick Install Guide - Page 2
and printer sharing across your local network. You can also set up an FTP server to access your files remotely through the Internet. AC1900 Wireless Dual Band Gigabit Router Model: Archer C9 Power: 12V 3.3A Default Access: http://tplinkwifi.net Username: admin Password: admin IC:8853A-C9 FCC
-
1 -
2
 |
 |
Quick Installation Guide
AC1900 Wireless Dual Band Gigabit Router
Connect the Hardware
Turn on the modem, and
then wait about
2 minutes
for it to restart.
Connect the modem to the
Internet port on your router
with an Ethernet cable.
Verify that the following LEDs are
on and solid before continuing
with the configuration.
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the router’s Internet port, then follow steps 5 and 6 to
complete the hardware connection.
Router
Modem
Power adapter
Power adapter
7106505584
REV2.0.0
Turn off the modem,
and remove the backup
battery if it has one.
2
4
Turn on the router.
5
3
6
Internet
Power
On
On
Internet
2.4G
On
5G
On
Note: If the 2.4G LED
and 5G LED
are off,
please press the WiFi button on the side panel
for 2 seconds and check the LEDs again a few
seconds later.
1
Install the antennas.